£10 SPOOL

3D FilaPrint Apple Green Premium PLA 2.85mm 3D Printer Filament

3D FilaPrint Apple Green Premium PLA 2.85mm 3D Printer Filament

£19.46 £23.35 inc. VAT £10.00 £12.00 inc. VAT

Out of stock

£19.46 £23.35 inc. VAT £10.00 £12.00 inc. VAT

An easy to print Premium PLA, extremely low warp (if at all) slightly modified PLA to give your prints extra strength and durability. VAT will be added at checkout, though we have covered the cost of regular postage! Plus if you buy two spools before 3pm today you will receive them next day (within the UK, Weekdays only).

Availability: Out of stock SKU: 5060994460476

Want to be notified when this product is back in stock?

Description

 

3D Filaprint Premium PLA.  Low warp, easy to print.  The filament spool is bagged, sealed and boxed.  Ensuring that it arrives with you moisture free and ready to print.

Fantastic layer bonding, low temperature printing, no heated platform is necessary as it lays down beautifully on the majority of FFF/FDM 3D printer platform surfaces.

Superb tolerances with a smooth finish, a perfect compliment to your 3D printer.

Features:

  • Tougher and less brittle compared to regular PLA
  • Easy to print at low temperature
  • Little “warping”
  • biodegradable
  • Limited odor
DiameterToleranceRoundness
2.85mm± 0,05mm>95%
CharacteristicsTest MethodTypical Value
Specific GravityASTM D15051,24 g/cc
MFI 6,0 g/10 min
Tensile StrengthASTM D882110 MPa (MD)
145 MPa (TD)
Elongation at breakASTM D882160 MPa (MD)
100 MPa (TD)
Tensile ModulusASTM D8823310 MPa (MD)
3860 MPa (TD)
Impact Strength 7,5 KJ/m≤
Printing CharacteristicsTest MethodTypical Value
Printing temperature 180-210∫c
Melting temperature 210±10∫c
Melting pointASTM D3418145-160∫c

Looking for a new type of 3D printing surface that requires very little maintenance and will last for months, if not years!, then try the amazing PrintBite.

 

      

 

PLA

Overview

PLA is easy to print, at low cost. Non-toxic and Eco friendly. A perfect starting point for people new to 3D printing.

PLA is created from all-natural renewable resources, and under the correct conditions, is fully biodegradable. This material is typically used for prototypes or decorative prints; Due to the low temperatures and ease of use, features tend to print sharper and more detailed. Its non-toxic nature means that it can be printed for food and medical applications if done so from a sterile and sanitized environment. 
However, PLA prints are prone to snapping and breaking under pressure, and become damaged and discolored from high temperatures and prolonged exposure to sunlight or water. 

Used for: Design prototypes, Plastic Cups, Medical Implants, Food containers.

Strength

Medium

Durability

Low

Printability

Very Easy

Pros

Cons

Recommended Settings

Print Temp

180°C -210°C

Cooling Fan on

Temp may vary on brand

Bed Temp

0°C – 45°C

Temp may vary on brand

Print Surface

No Heated Bed Required
No Enclosure Required

Example Prints

Additional information

Weight1 kg
Dimensions210 × 210 × 90 mm
Filament Brand

3D FilaPrint

Filament Colour

Green

Filament Diameter

2.85mm

RAL Colour Reference

6018

Filament Weight

1Kg

Filament Type

PLA

Filament Range

FilaPrint Premium PLA

1 review for 3D FilaPrint Apple Green Premium PLA 2.85mm 3D Printer Filament

  1. 5 out of 5

    Ian Hiscocks

    This was a really nice filament to print with, printing well at 50mm/s it could print a little faster up to 65mm/s with care. It handled bridging and overhangs well, only a minimum of stringing and gave a nice surface finish to the parts. The temperature range is 180-210 and most colours print well at 195, the odd one or two needing upto 205 for best surface finish, and will print well on a heated with just hairspray a non heated bed may need a good adhesive. Any clean up was easy and blended in well with a sharp knife and simple files. There are some nice colours in the range including bright colours and metallics the Bronze gold has a really nice hue, varying colour slightly depending on light direction and looks very nice especially for Xmas decorations or for any trophies etc. After testing this filament it is now one of my goto PLA filaments for quality building, and for repeatable testing when trying out different size Nozzles to finding the correct preferred settings. For the price including P&P the 1kg reel is very good value, you also get a medium size ziplock bag to keep the reel sealed in when not in use to prevent moisture absorption. If you have some serious printing to do, or if you or the children just want to have a good play with your printer this is a good quality filament to do it with and in some very nice colours.


Add a review