3D FilaPrint ASA X Light Grey 1.75mm 3D Printer Filament 2.3kg

3D FilaPrint ASA X Light Grey 1.75mm 3D Printer Filament 2.3kg

£73.66 £61.38 ex. VAT

Out of stock

£73.66 £61.38 ex. VAT

A modified, easy to print quality ASA filament, great for outdoor use, due to its UV and high impact resistance.

Availability: Out of stock SKU: 5060994464917

Want to be notified when this product is back in stock?


ASA X is a modified ASA (Acrylic Styrene Acrylonitrile) 3D Desktop printing filament.

ASA X has been developed specifically for outdoor use.  The benefits of using ASA have always been its high impact and high temperature resistance, coupled with its UV resistance properties.  Now with ASA X you have all these great qualities in a formula that is easier to print, available in several standard colours and at a very reasonable price.

The test sample you can see in the product photo was printed on the open style e3D Big Box 3D printer which is a semi enclosed unit.  The printing temperature was at 235c and the platform was heated to 80c, with a very fine layer of 3DLac adhesion spray.

There was very little “tweaking” of the standard “ABS” settings when using our Simplify 3D slicing software.  Which is a plus, because of the historical issues sometimes found when printing with regular ASA filament.  There was also very minimum warping (if any that was visible on this test print) which was sometimes a past characteristic when printing with ASA filament.  Another plus of ASA X is the issues with “cooling” with users having to change setting during prints to ease up or speed up cooling.  With the new ASA X this is no longer and issue.  No fan 1st layer, 60% fan after, good to go.  Though this may be model dependent.

Although there is a very low odour to the FilaPrint ASA X, and it does smell semi sweet, you should as with all 3D printing materials undertake your printing in a well ventilated, spacious environment, more so when printing with materials like ASA, ABS, HIPS, Vinyl etc.

ASA material has been around for some time, we read somewhere it was developed by BASF, though now is the perfect time to introduce a 3D printing filament, which is perfect for outdoor use to your own 3D printing toolbox.

This 1Kg spool is packaged in a sealed clear cellophane, then sealed again inside a cardboard box.  We also provide a re-sealable bag to use once the spool has been opened.  As it is always best practice to keep all your filaments dry and away from excessive moisture, some more than others.  You do however have the choice NOT to receive one of our bags if you have enough of them already!  Just make that choice during the product selection.

The price you see is the price you pay, postage has already been included!

Summary of information:

  • UV Resistant – Great for outdoor use
  • Impact & Heat resistant
  • Low odour
  • Easy to print
  • Superb bonding between layers
  • Excellent surface finish
  • Great solid colours
1.75mm± 0,05mm>95%
CharacteristicsTest MethodTypical Value
Specific GravityISO 11831,11 g/cc
MFR 210°c/2,16 kgISO 113326.6 gr/10 min
Tensile strength at yield (MPa)ISO 52747,5 Mpa
Strain at yieldISO 5272,1%
Tensile-modulusISO 5272020 Mpa
Impact Strength 18 KJ/m≤
Printing CharacteristicsTest MethodTypical Value
Printing temperature 245±10C

Looking for a new type of 3D printing surface that requires very little maintenance and will last for months, if not years, then try the amazing PrintBite.




Strong and UV Resistant. An outdoor alternative to ABS.

 ASA has the same solid properties of ABS having high strength and being quite durable, With the exception that it will not become discolored or lose its form from sunlight exposure. 

Printing can be difficult and printer tuning may be needed to prevent prints from warping. When printing with this material, it is possible that toxic fumes are produced. This can be circumvented by printing In a well-ventilated area or using an extractor.

Used for: Outdoor applications, Electrical Fittings, Interior car parts.









Recommended Settings

Print Temp

220°C -255°C

Cooling Fan On, Low Speed

Temp may vary on brand

Bed Temp

80°C -100°C

Temp may vary on brand

Print Surface

Heated Bed Required
Enclosure Recommended

Example Prints

Additional information

Weight1 kg
Dimensions300 × 300 × 100 mm
Filament Brand

3D FilaPrint

Filament Colour


Filament Diameter


Filament Length

Approx 325 Metres

Filament Type


Filament Weight


RAL Colour


Filament Weight


Filament Range

FilaPrint ASA X


There are no reviews yet.

Be the first to review “3D FilaPrint ASA X Light Grey 1.75mm 3D Printer Filament 2.3kg”