3D FilaPrint Black Premium ABS 2.85mm 3D Printer Filament

3D FilaPrint Black Premium ABS 2.85mm 3D Printer Filament

£24.37 £20.31 ex. VAT

Out of stock

£24.37 £20.31 ex. VAT

An easy to print Premium ABS, great layer bonding, low odor compared to other ABS filaments. The price you see is the price you pay, delivered to your door for a whole 1 Kg spool.

Availability: Out of stock SKU: 5060994460032

Want to be notified when this product is back in stock?


Low warp, Low odour, Low Price!   Easy to print.  1 Kilo of Iron Grey premium ABS 3D Printer Filament, amazing value for money.

This 1kg of filament spool is shrink wrapped, boxed and shrink wrapped yet again!  Ensuring that it arrives with you moisture free and ready to print.

Great layer bonding,easily prints on a bed of Kapton Tape, PrintBite or Lokbuild.

Superb tolerances with a smooth finish, a perfect compliment to your 3D printer.


  • High impact resistance. very strong
  • Limited odour & warping
2.85mm± 0,10mm>95%
CharacteristicsTest MethodTypical Value
Specific GravityASTM D7921,03 g/cc
MFR 220∫C/10kgASTM D12388,0 g/10 min
Tensile StrengthISO 52744 MPa (Mpa)
Strain at breakISO 5279%
Tensile ModulusASTM D6382000 MPa
Impact Strength
Izod method 23∫C
ISO 180/A36 KJ/m≤
Printing CharacteristicsTest MethodTypical Value
Printing temperature 220-270∫c
Melting temperatureISO 294245±10∫c
Vicat softening temperatureISO 306±103∫c

Always print in a well ventilated area.





Strong and robust. Heat and chemical resilient. An Inexpensive choice for engineering-grade prints.

ABS has solid mechanical properties in the form of heat and impact resistance. Its high durability makes it perfect for printing moving and weight-bearing parts. ABS is shatter resistant; when pushed to its limit parts will bend or warp instead of snapping or shattering. ABS has decent chemical sustainability, making it resilient to sunlight, moisture, acids, and oils. Long exposure to sunlight may cause prints to degrade, making ASA a better choice for outdoor prints.

ABS is quite a common material making it relatively inexpensive whilst also being built to last in tough environments. The main detriment is that it can be quite difficult to print with, and can require printer tuning to get the perfect print.
Printed parts can be polished with acetone, giving them a smooth and glossy finish and hiding layer lines. When printing with this material, it is possible that toxic fumes are produced. This can be circumvented by printing In a well-ventilated area or using an extractor.

Used for: Injection molding, LEGO, electronic casings, automotive parts.









Recommended Settings

Print Temp

220°C – 270°C

Cooling Fan Off

Temp may vary on brand

Bed Temp

80°C – 110°C

Temp may vary on brand

Print Surface

Heated Bed Required
Enclosure Required

Example Prints

Additional information

Weight1 kg
Dimensions210 × 210 × 90 mm
Filament Brand

3D FilaPrint

Filament Colour


Filament Diameter


Filament Type


Filament Weight


RAL Colour Reference


Filament Weight


Filament Range

FilaPrint Premium ABS

1 review for 3D FilaPrint Black Premium ABS 2.85mm 3D Printer Filament

  1. 5 out of 5

    Jeff Caunter

    If, like me, you prefer to use ABS for its mechanical properties at a reasonable price then this is a perfect filament to use. Unlike many other ABS varieties, it has reduced shrinkage so is far less likely to warp and lift off the buildplate, an important factor when printing objects with a large flat base. On my UM2 I do not need to print a raft or brim, and it stays stuck to the heated glass plate without special tapes or mats. I use a glue stick made by Bostik called ‘Big Blue’, and also a gel made by Pritt (often sold in Lidl). Both are perfect with this premium product, and release the model from the glass easily when cooled to room temperature. Furthermore, the filament bridges quite well and the outer surface quality is very good. It flows well through the hotend, does not appear to carbonise easily at high temperatures, and is capable of producing excellent prints even at thick layer hights and high speed. I regularly print things like gears, levers, and brackets with 0.3mm layers at up to 100mm/sec without ever having de-lamination problems. Yes, if you like ABS, then you’ll love this one.

Add a review