![carbon-fibre-pet-g-1.75mm-500gms-[2]-11701-p](https://3dfilaprint.com/wp-content/uploads/2021/10/carbon-fibre-pet-g-1.75mm-500gms-2-11701-p-150x150.jpg)
![carbon-fibre-pet-g-1.75mm-500gms-[3]-11701-p](https://3dfilaprint.com/wp-content/uploads/2021/10/carbon-fibre-pet-g-1.75mm-500gms-3-11701-p-150x150.jpg)
![carbon-fibre-pet-g-1.75mm-500gms-[5]-11701-p](https://3dfilaprint.com/wp-content/uploads/2021/10/carbon-fibre-pet-g-1.75mm-500gms-5-11701-p-150x150.jpg)
![carbon-fibre-pet-g-1.75mm-500gms-[4]-11701-p](https://3dfilaprint.com/wp-content/uploads/2021/10/carbon-fibre-pet-g-1.75mm-500gms-4-11701-p-150x150.jpg)
3D FilaPrint Carbon Fibre PET-G 2.85mm 500gms
£31.42 £37.70 inc. VAT
PET-G filament enfused with 20% Carbon Fibers.
- Description
- What is PET-G?
- Additional information
- Reviews (0)
Description
A PET-G polymer filament which has been enfused with minute carbon fibres (no nozzle clogging with this filament). Giving you a wonderful lightweight , easy to print, high strength, extremely low warp filament. Perfect for drones, RC Cars, trucks, tanks, plus many more incredible uses.
FilaPrint Carbon-P is a 20% Carbon Fibre reinforced PET-G based filament. The result is a twice as stiff filament as our current PET-G with increased impact and heat resistance (HDT) to 80c. This together with other features such as NO WARP, dimensionally stable, Matte surface and extremely easy to print, make it an ideal filament.
| Printing Temperature Range |
|
| 225-245°C |
|
| Does not require heated platform If available heat between 35-60°c |
|
Description Specific gravity | Test method ASTM D792 | Typical Value 1,19 g/cc |
MFI (300C -1,2kg) | ISO 1133 | N.D |
E-modulus 1mm/min | ISO 527 | 3800 MPa |
Yield stress 50mm/min | ISO 527 | 52,5 MPa |
Yield strain 50mm/min | ISO 527 | 4,2% |
Strain at breakn50min/min | ISO 527 | 8,0% |
Impact Strength | ISO 180-1A | 3,8 kJ/m≤ |
Due to no warping, the FilaPrint Carbon P filament can be printed without a heated platform. If you do have a heated bed then you can heat to between – 35-60c. Please also consider using hardened steel nozzles as the carbon fibers will increase the wear and tear on standard brass nozzles. FilaPrint Carbon-P can be used on the majority of 3D Desktop FDM/FFF/ printers.
Storage
Cool and dry (15-25c) and away from UV light, will enhance shelf life significantly.
PET-G
Overview
A versatile middle ground between PLA and ABS.
PET-G Is stronger than PLA but easier to print with than ABS. The glycol in this material makes the filament less brittle and resistant to water, chemicals, and solvents. It is naturally clear, making it the go-to filament for translucent prints.
The strength and durability of a PET-G filament vary depending on the brand. An easy way to check if one PET-G is stronger than another is by comparing the tensile strength value of each filament. If printed in a sterile, FDA-approved environment, PET-G can be used to create food-safe prints.
Due to its strong and durable nature, PET-G can be difficult to finish with post-processing methods such as sanding. Prints may also be difficult to paint or glue together. Depending on printer and slicer settings, you may experience small hairs over the surface of prints caused by stringing. These can be removed with a heat gun or lighter.
Used for: Water Bottles, Plant Pots.
Printability
Medium
Pros
-
Water Resistant -
Naturally Translucent -
Decent Strength and Durability
Cons
-
Printer Tuning Required -
Difficult to Post-Process -
Stringing can Occur
Recommended Settings
Print Temp
Cooling Fan On
Temp may vary on brand
Bed Temp
Temp may vary on brand
Print Surface
No Heated Bed Required
No Enclosure Required
Example Prints
Additional information
| Weight | 0.5 kg |
|---|---|
| Filament Brand | 3D FilaPrint |
| Filament Colour | Black |
| Filament Diameter | 2.85mm |
| Filament Type | PETG |
| Filament Weight | 500gms |
| Filament Weight | 500gms |
| Filament Range | FilaPrint CF-PETG |
Reviews
There are no reviews yet.