3D FilaPrint Iron Grey Premium ABS 1.75mm 3D Printer Filament
£20.31 £24.37 inc. VAT £10.00 £12.00 inc. VAT
An easy to print Premium ABS, great layer bonding, low odor compared to other ABS filaments. The price you see is the price you pay, delivered to your door for a whole 1 Kg spool.
Want to be notified when this product is back in stock?
- Description
- What is ABS?
- Additional information
- Reviews (2)
Description
Low warp, Low odour, Low Price! Easy to print. 1 Kilo of premium Orange ABS 1.75mm 3D Printer Filament, amazing value for money.
This 1kg of filament spool is shrink wrapped, boxed and shrink wrapped yet again! Ensuring that it arrives with you moisture free and ready to print.
Great layer bonding, easily prints on a bed of Kapton Tape or other suitable platform materials.
Superb tolerances with a smooth finish, a perfect compliment to your 3D printer.
Features:
- High impact resistance. very strong
- Limited odour & warping
| Diameter | Tolerance | Roundness |
|---|---|---|
| 1.75mm | ± 0,05mm | >95% |
| Characteristics | Test Method | Typical Value |
| Specific Gravity | ASTM D792 | 1,03 g/cc |
| MFR 220∫C/10kg | ASTM D1238 | 8,0 g/10 min |
| Tensile Strength | ISO 527 | 44 MPa (Mpa) |
| Strain at break | ISO 527 | 9% |
| Tensile Modulus | ASTM D638 | 2000 MPa |
| Impact Strength Izod method 23∫C | ISO 180/A | 36 KJ/m≤ |
| Printing Characteristics | Test Method | Typical Value |
| Printing temperature | 220-270∫c | |
| Melting temperature | ISO 294 | 245±10∫c |
| Vicat softening temperature | ISO 306 | ±103∫c |
Always print in a well ventilated area.
ABS
Overview
Strong and robust. Heat and chemical resilient. An Inexpensive choice for engineering-grade prints.
ABS has solid mechanical properties in the form of heat and impact resistance. Its high durability makes it perfect for printing moving and weight-bearing parts. ABS is shatter resistant; when pushed to its limit parts will bend or warp instead of snapping or shattering. ABS has decent chemical sustainability, making it resilient to sunlight, moisture, acids, and oils. Long exposure to sunlight may cause prints to degrade, making ASA a better choice for outdoor prints.
ABS is quite a common material making it relatively inexpensive whilst also being built to last in tough environments. The main detriment is that it can be quite difficult to print with, and can require printer tuning to get the perfect print.
Printed parts can be polished with acetone, giving them a smooth and glossy finish and hiding layer lines. When printing with this material, it is possible that toxic fumes are produced. This can be circumvented by printing In a well-ventilated area or using an extractor.
Used for: Injection molding, LEGO, electronic casings, automotive parts.
Printability
Difficult
Pros
- Heat and Chemical Retardant Properties
- High Impact Resistance
- High Durability
Cons
- Printer Tuning Required
- Warps Easily
- Light Odour While Printing
- Can Potentially Produce Toxic Fumes
Recommended Settings
Print Temp
Cooling Fan Off
Temp may vary on brand
Bed Temp
Temp may vary on brand
Print Surface
Heated Bed Required
Enclosure Required
Example Prints
Additional information
| Weight | 1 kg |
|---|---|
| Dimensions | 210 × 210 × 90 mm |
| Filament Brand | 3D FilaPrint |
| Filament Colour | Grey |
| Filament Diameter | 1.75mm |
| Filament Type | ABS |
| Filament Weight | 1Kg |
| RAL Colour Reference | 7011 |
| Filament Weight | 1Kg |
| Filament Range | FilaPrint Premium ABS |
2 reviews for 3D FilaPrint Iron Grey Premium ABS 1.75mm 3D Printer Filament
Add a review
You must be logged in to post a review.
Rob Townshend –
Here is an example of a project in progress. I am printing at 100% fill as this is part of a lap steel guitar and needs the strength. I am on my second reel of this colour and I like it for engineering parts. I have had no problems except for a bit of corner lift, which I expect with standard ABS and large solid prints.
Trevor Day – Enterprise XD Design –
Yes, I WILL use it…
I was originally sent this filament as a sample with another order, and my immediate reaction was “well, it looks great but I’m not sure what I’d ever use it for”. And then I used it. And used it. And used it. Again, a joy to work with; very nice semi-gloss finish, easy as pie to dial in and works beautifully in everything Ive used it with. I normally order the ABS-X version but the ABS version is pretty much the same, so order both!