![filaprint-red-premium-abs-1.75mm-3d-printer-filament-[2]-12445-p](https://3dfilaprint.com/wp-content/uploads/2021/10/filaprint-red-premium-abs-1.75mm-3d-printer-filament-2-12445-p-150x150.jpg)
3D FilaPrint Red Premium ABS 1.75mm 3D Printer Filament
£20.31 £24.37 inc. VAT
An easy to print Premium ABS, great layer bonding, low odor compared to other ABS filaments. The price you see is the price you pay, delivered to your door for a whole 1 Kg spool.
Want to be notified when this product is back in stock?
- Description
- What is ABS?
- Additional information
- Reviews (1)
Description
Low warp, Low odour, Low Price! Easy to print. 1 Kilo of premium Orange ABS 1.75mm 3D Printer Filament, amazing value for money.
This 1kg of filament spool is shrink wrapped, boxed and shrink wrapped yet again! Ensuring that it arrives with you moisture free and ready to print.
Great layer bonding, easily prints on a bed of Kapton Tape or other suitable platform materials.
Superb tolerances with a smooth finish, a perfect compliment to your 3D printer.
Features:
- High impact resistance. very strong
- Limited odour & warping
| Diameter | Tolerance | Roundness |
|---|---|---|
| 1.75mm | ± 0,05mm | >95% |
| Characteristics | Test Method | Typical Value |
| Specific Gravity | ASTM D792 | 1,03 g/cc |
| MFR 220∫C/10kg | ASTM D1238 | 8,0 g/10 min |
| Tensile Strength | ISO 527 | 44 MPa (Mpa) |
| Strain at break | ISO 527 | 9% |
| Tensile Modulus | ASTM D638 | 2000 MPa |
| Impact Strength Izod method 23∫C | ISO 180/A | 36 KJ/m≤ |
| Printing Characteristics | Test Method | Typical Value |
| Printing temperature | 220-270∫c | |
| Melting temperature | ISO 294 | 245±10∫c |
| Vicat softening temperature | ISO 306 | ±103∫c |
Always print in a well ventilated area.
ABS
Overview
Strong and robust. Heat and chemical resilient. An Inexpensive choice for engineering-grade prints.
ABS has solid mechanical properties in the form of heat and impact resistance. Its high durability makes it perfect for printing moving and weight-bearing parts. ABS is shatter resistant; when pushed to its limit parts will bend or warp instead of snapping or shattering. ABS has decent chemical sustainability, making it resilient to sunlight, moisture, acids, and oils. Long exposure to sunlight may cause prints to degrade, making ASA a better choice for outdoor prints.
ABS is quite a common material making it relatively inexpensive whilst also being built to last in tough environments. The main detriment is that it can be quite difficult to print with, and can require printer tuning to get the perfect print.
Printed parts can be polished with acetone, giving them a smooth and glossy finish and hiding layer lines. When printing with this material, it is possible that toxic fumes are produced. This can be circumvented by printing In a well-ventilated area or using an extractor.
Used for: Injection molding, LEGO, electronic casings, automotive parts.
Printability
Difficult
Pros
-
Heat and Chemical Retardant Properties -
High Impact Resistance -
High Durability
Cons
-
Printer Tuning Required -
Warps Easily -
Light Odour While Printing -
Can Potentially Produce Toxic Fumes
Recommended Settings
Print Temp
Cooling Fan Off
Temp may vary on brand
Bed Temp
Temp may vary on brand
Print Surface
Heated Bed Required
Enclosure Required
Example Prints
Additional information
| Weight | 1 kg |
|---|---|
| Filament Brand | 3D FilaPrint |
| Filament Colour | Red |
| Filament Diameter | 1.75mm |
| Filament Type | ABS |
| Filament Weight | 1Kg |
| RAL Colour Reference | 3020 |
| Filament Weight | 1Kg |
| Filament Range | FilaPrint Premium ABS |
Andy Grigg –
Top quality stuff
I thought I’d try this and the ABS-X, as I have been having supply issues with the brand I usually buy. I print fairly small functional parts that tend to be quite complex, so print quality, dimensional accuracy and layer adhesion/strength are all important to me. I have only run a couple of test prints, but this ABS is superior to my usual stuff for similar cost. The red colour is also better than what I have been using, which looks red on the reel but is more salmon and washed out. The Filaprint ABS red looks like ‘Lego’ red on the reel, and comes out the same after printing, which is great. I will definitely be buying more – I’m keen to try the black, which I go through a lot of. The only thing I would say is that it would be great if more colour options were available – current selection is quite limited and I print ABS exclusively. The UK is not well served for interesting ABS colours, so it would fill a gap in the market. Also, it would be nice to see some discount offers e.g. for buying 3 rolls of a single colour.