NEW

3DQF Pearl Blue PLA 1.75mm 1kg 3D Printing Filament

3DQF Pearl Blue PLA 1.75mm 1kg 3D Printing Filament

£21.59 £17.99 ex. VAT

In stock

£21.59 £17.99 ex. VAT

Brought to you from their factory in Greater Manchester, United Kingdom, 3DQF is eager to broaden its product range with exciting new materials and colours. Maintaining a remarkable tolerance of +/- 0.03 mm.

Availability: In stock SKU: 5065014739143

Description

Spec 

  • Material PLA filament
  • Diameter 1.75mm + or – 0.03mm
  • Filament weight 1 KG gross
  • Hotend temp 210 – 225°C (between 60-120mm/s print speed)
  • Bed temperature 40-50°C or unheated
  • High-speed printing guide available

Spool Spec

  • 69mm W
  • 194 mm D
  • 70 mm Axle
  • Card Construction
  • Airtight Bag with desiccant

Crucial Guidelines to Remember:

First and foremost, keep in mind that patience and practice are essential for achieving success in 3D printing. You’re embarking on a learning curve, and one of the initial challenges you’ll face is achieving proper bed adhesion.

It’s imperative to carefully read and adhere to the instructions provided with your 3D printer. Additionally, utilize these instructions and other guides as valuable references for your personal growth in 3D printing.

Filament Temperature Insights:

For optimal results with 3DQF PLA, maintain a hot-end temperature between 210-225°C. We recommend beginning within this range for your initial prints. It’s worth noting that most imported filaments require lower temperatures due to fillers and additives. Therefore, it’s perfectly normal to require slightly more heat with the pure Natureworks material.

Please be aware that the maximum safe hot-end temperature for 3DQF PLA is 225°C, specifically when printing at speeds up to 120mm per second (‘mm/s’). Avoid exceeding this temperature limit if you’re printing at speeds below 120 mm/s.

High-speed printing has become popular, and with increased speed comes the necessity for higher temperatures to facilitate material flow. If you plan to use our filament in a high-speed printer, consult our “High-speed printing” guide for temperature recommendations.

Bed Temperature Recommendations:

We advise maintaining a heated bed temperature for 3DQF PLA of no higher than 50°C. This temperature range ensures proper adhesion while minimizing the risk of warping or deformation. Increasing the bed temperature beyond this limit will not enhance bed adhesion; in fact, cooling it down can be more beneficial. If you encounter difficulties with filament adhesion, consult our z-offset guide, which often addresses the issue. Never underestimate the importance of a flat and level bed accurately trammelled to the extruder’s gantry, as it simplifies setting the z-offset.

Seamless Filament Management:

In the design process, we recognized the importance of ensuring that our filament spools release the filament cleanly at the end of the roll. To achieve this, we loop the end of the roll outside the spool, allowing you to snip it free before it runs out. This approach enables the tail of the filament to release smoothly at the end of the roll, and it’s particularly advantageous if you have a run-out detector, as it can pause your print. In contrast, many imported filaments on plastic spools make accessing the tail of the filament difficult, leading to various issues when the end doesn’t release cleanly from the spool.

Filament Cleaning:

Effective filament cleaning is crucial, especially considering that filament can sit around for extended periods. Dust tends to accumulate on the filament’s surface, which, when introduced into the extruder, can lead to blockages over time. To counter this, we recommend using a filament cleaner to wipe the filament just before it enters the PTFE tube or extruder. This can be as simple as a small foam section acting as a wiper to maintain a clean filament feed.

AMS, Dry Box & Roller unloader user please use MK19 Edge Protectors

Additional information

Weight1 kg
Filament Colour

Blue

Filament Range

3DQF

Filament Type

PLA

Filament Diameter

1.75mm

Filament Brand

3DQF PLA

Filament Weight

1Kg

Reviews

There are no reviews yet.


Be the first to review “3DQF Pearl Blue PLA 1.75mm 1kg 3D Printing Filament”