3DXSTAT ESD PLA 1Kg 1.75mm 3D Printing Filament

3DXSTAT ESD PLA 1Kg 1.75mm 3D Printing Filament

£97.00 £116.40 inc. VAT

Out of stock

£97.00 £116.40 inc. VAT

3DXSTAT ESD PLA enhanced compounds are used in critical applications that require electrostatic discharge (ESD) protection and a high level of cleanliness. Manufactured with consistency in mind, giving you a filament with excellent printing characteristics and consistent ESD properties.

Availability: Out of stock SKU: 15733

Want to be notified when this product is back in stock?

Description

 

3DXSTAT ESD-SAFE PLA 3D Filament 2Kg spool.

3DXSTAT ESD PLA is an advanced ESD-Safe compound designed for use in critical applications that require electrostatic discharge (ESD) protection.   Made using cutting-edge multi-wall carbon nanotube technology, state of the art compounding technology, and precision extrusion processes.  Target surface resistance:  10^7 to 10^9 Ohm.

Benefits of 3DXSTAT include:

  • Ideal for printing without a heated bed – no enclosure required
  • Low shrink / warp – very easy to print
  • Low odor – ideal for printing in public spaces / office environments
  • Consistent and reliable surface resistance
  • Improved retention of impact & elongation vs. similar ESD-safe materials
  • Low particulate contamination
  • Minimal contribution to outgassing and ionic contamination

Typical applications include:

  • Semi-con:  HDD Components, Housings, Wafer Handling, Jigs, Casings, & Connectors 
  • Industrial:  Fixtures, Conveying, Metering, End-of-arm Tooling, and Sensing applications

Target conductivity for 3DXSTAT ESD PLA:  

  • Spec:  10^6 to 10^9 Ohm surface resistivity on 3DP sample using concentric ring method, target 10^7 Ohm
  • Note:  Internal studies have indicated that increased extruder temperatures can achieve higher levels of conductivity.  Likewise, lower extruder temperatures have resulted in lower levels of conductivity. Each printer is set-up differently as well as varied part geometry.  Therefore, expect some trial time to understand how this filament works in your specific printer / application. 

Recommended Print Conditions:

  • Extruder Temp:  Typically 210-220?C.  3DXSTAT ESD PLA is a filled product and has a higher melt viscosity vs. unfilled PLA.  Therefore, it is sometimes necessary to print at higher temperatures than your standard PLA to allow the resin to flow properly.  
  • Extrusion Multiplier:  1.15 – 1.20
  • Extrusion Speed:  60mm/s or higher
  • Bed Temp:  23-60?C
  • Fan Speed:  50-100% starting on 2nd layer
  • Bed Prep:  Blue Tape, Hairspray on clean glass

Health & Safety

  1. Please download and read the MSDS for this product.
  2. Please print in a well-ventilated area.
  3. This product contains multi-wall carbon nanotubes (CNTs). The CNTs contained in this product are fully encapsulated in the polymer matrix and do not migrate out of the product during handling or processing.
  4. We do not recommend that users sand, drill, or perform other mechanical operations on this polymer that may cause particulates of polymer and CNT to become airborne. Moisture (i.e., wet sanding) eliminates this dust / particulate risk.
  5. Do not exceed 260?C extruder temperature. This polymer is thermally stable at temperatures above 255?C, however this temperature limit will help assure that polymer degradation does not become an issue.  
     
 
USA Customer Reviews

Jeffrey H. 

Amazing Material

This ESD PLA is not only ESD but it is extremely strong versus regular PLA. We have found ourselves using it for everything not just where ESD material is needed. It is 10 to the 6th as far as ESD material goes we use a concentric ring tester. Other materials that claimed to be ESD were way off at 10 to the 11th. I really hope 3DXTECH never stops making this material.

Scott M. 
United States

Great prints

Prints out great structurally with great layer adhesion.

Will
Tampa, Florida

An Excellent Material

This ESD-PLA prints just as easily as standard PLA. It is great quality and is verified ESD safe. I print at the suggested settings except I left the extrusion multiplier at 1 and not the reccomended 1.15-1.2. I tried printing at both but the only differences i noticed were dimensional. 10/10!

Anonymous 
United States

ESD PLA Filament

Product was easy to use and passed our ESD test criteria.

 

PLA

Overview

PLA is easy to print, at low cost. Non-toxic and Eco friendly. A perfect starting point for people new to 3D printing.

PLA is created from all-natural renewable resources, and under the correct conditions, is fully biodegradable. This material is typically used for prototypes or decorative prints; Due to the low temperatures and ease of use, features tend to print sharper and more detailed. Its non-toxic nature means that it can be printed for food and medical applications if done so from a sterile and sanitized environment. 
However, PLA prints are prone to snapping and breaking under pressure, and become damaged and discolored from high temperatures and prolonged exposure to sunlight or water. 

Used for: Design prototypes, Plastic Cups, Medical Implants, Food containers.

Strength

Medium

Durability

Low

Printability

Very Easy

Pros

Cons

Recommended Settings

Print Temp

180°C -210°C
Cooling Fan on

Bed Temp

0°C – 45°C

Print Surface

No Heated Bed Required
No Enclosure Required

Example Prints

Additional information

Weight 1 kg
Filament Brand

3DXTech

Filament Colour

Black

Filament Diameter

1.75mm

Filament Type

ESD PLA

Filament Weight

1Kg

Filament Weight

1Kg

Reviews

There are no reviews yet.


Be the first to review “3DXSTAT ESD PLA 1Kg 1.75mm 3D Printing Filament”

The maximum upload file size: 5 MB. You can upload: image, audio, video, document, spreadsheet, interactive, text, archive, code, other. Links to YouTube, Facebook, Twitter and other services inserted in the comment text will be automatically embedded. Drop file here

You may also like…