3DXTech 3DXSTAT ESD-FLEX TPU 3D 750g 2.85mm 3D Printing Filament
£116.93 £97.44 ex. VAT
- Description
- Additional information
- Reviews (0)
Description
3DXSTAT™ ESD-Flex TPU 3D Printing Filament [95A]
3DXSTAT™ ESD-Flex TPU [thermoplastic polyurethane] elastomer is an engineering-grade thermoplastic chosen for its balance of excellent flexibility, ease of printing, chemical resistance, and toughness. 3DXSTAT™ ESD Flex elastomeric filament has been formulated to offer ESD-Safe electrical conductivity with a target surface resistance of 10^7 to 10^9 Ohm.
Benefits of Flexible TPU Include:
- High elongation, over 300%
- Shore 95A semi-flex hardness
- Ease of printing compared to similar flexible materials
- Excellent layer bonding
- Outstanding fatigue resistance
- Very low odor while printing
- Low moisture absorption
- Retains flexibility even at low temperatures
- Styrene and BPA free
Benefits of 3DXSTAT™ Include
- Consistent surface resistivity
- Improved retention of impact & elongation
- Low particulate contamination
- Minimal contribution to outgassing and ionic contamination
Typical ESD Flex Applications Include:
- Semi-con: HDD Components, Wafer Handling, Jigs, Casings, & Connectors
- Industrial: Conveying, Metering, and Sensing Applications
Target Conductivity for 3DXSTAT ESD Flex:
- 10^7 to 10^9 ohm surface resistivity on 3DP sample using concentric ring test method.
- Note: Internal studies have indicated that increased extruder temperatures can achieve higher levels of conductivity. Likewise, lower extruder temperatures have resulted in lower levels of conductivity. Each printer is set-up differently, not to mention varied part geometry. Therefore, expect some trial time to understand how ESD Flex filament works in your specific printer and application.
Surface Conductivity as a Function of Extruder Temperature:
The surface resistance of the printed ESD Flex part will vary depending on the printer’s extruder temperature. For example, if your testing indicates the part is too insulative, then increasing the extruder temperature will result in improved conductivity. Therefore, the surface resistance can be ‘dialed-in’ by adjusting the extruder temperature up or down depending on the reading you receive on your part.
Filament Specifications:
1.75mm and 2.85mm +/- 0.05mm in diameter
Recommended ESD Flex Print Settings:
- Extruder: 220-240°C
- Bed Temp: 40-60°C
- Bed Prep: 3Dlac, Printafix or Dimafix gives us the best results.
- Heated Chamber: Not required
- Supports: PVA Supports works with this filament.
- Drying Instructions: 65°C for 4 hours.
Additional information
| Weight | 0.75 kg |
|---|---|
| Dimensions | 210 × 210 × 75 mm |
| Filament Diameter | 2.85mm |
| Filament Weight | 750gms |
| Filament Type | TPU |
| Filament Colour | Black |
| Filament Range | 3DXTech 3DXStat |
| Filament Brand | 3DXTech |
Be the first to review “3DXTech 3DXSTAT ESD-FLEX TPU 3D 750g 2.85mm 3D Printing Filament”
You must be logged in to post a review.
Reviews
There are no reviews yet.