3DXTech FIREWIRE™ Flame Retardant PC-ABS 3D Printing Filament Sample

3DXTech FIREWIRE™ Flame Retardant PC-ABS 3D Printing Filament Sample

Out of stock

Firewire? FR PC-ABS is made using a premium UL94 V-0 rated ABS and Polycarbonates

SKU: 51542

Want to be notified when this product is back in stock?

This product is currently out of stock and unavailable.



FIREWIRE Flame Retardant PC-ABS 3D Printing Filament 1Kg 2.85mm Firewire™ FR PC-ABS (polycarbonate + ABS alloy) is made using a premium UL94 V-0 rated PC-ABS.  Our FR PC-ABS has higher strength and thermal resistance (HDT) than ABS and is supplied on 1kg reels (2.2 lbs.) reels.  This filament is ideal for applications that require UL94 V-0 self-extinguishing characteristics. Filament diameter specs:  

  • 1.75mm +/- 0.05mm
  • 2.85mm +/- 0.05mm

Recommended Print Conditions:

  • Extruder Temp:  265-285?C, Ideal 270?C
  • Bed Temp:  110 – 120?C
  • Bed Prep:  3DXTech Polyimide Tape, ABS / Acetone Slurry
  • Drying Instructions:  Please see the following instructions for when you want to dry out this filament, HERE.

*This is the UL94 rating of base resin we use to make Firewire™ FR PC-ABS Filament.




Strong and robust. Heat and chemical resilient. An Inexpensive choice for engineering-grade prints.

ABS has solid mechanical properties in the form of heat and impact resistance. Its high durability makes it perfect for printing moving and weight-bearing parts. ABS is shatter resistant; when pushed to its limit parts will bend or warp instead of snapping or shattering. ABS has decent chemical sustainability, making it resilient to sunlight, moisture, acids, and oils. Long exposure to sunlight may cause prints to degrade, making ASA a better choice for outdoor prints.

ABS is quite a common material making it relatively inexpensive whilst also being built to last in tough environments. The main detriment is that it can be quite difficult to print with, and can require printer tuning to get the perfect print.
Printed parts can be polished with acetone, giving them a smooth and glossy finish and hiding layer lines. When printing with this material, it is possible that toxic fumes are produced. This can be circumvented by printing In a well-ventilated area or using an extractor.

Used for: Injection molding, LEGO, electronic casings, automotive parts.









Recommended Settings

Print Temp

220°C – 270°C

Cooling Fan Off

Temp may vary on brand

Bed Temp

80°C – 110°C

Temp may vary on brand

Print Surface

Heated Bed Required
Enclosure Required

Example Prints

Additional information

Weight0.035 kg
Filament Brand


Filament Colour


Filament Diameter

1.75mm – 10 Meters, 2.85mm – 6 Meters

Filament Weight


Filament Range

3DXTech Firewire


There are no reviews yet.

Be the first to review “3DXTech FIREWIRE™ Flame Retardant PC-ABS 3D Printing Filament Sample”