Alloy 910 HDT Black 1.75mm 1lbs 3D Printer Filament
£35.93 £29.94 ex. VAT £26.95 £22.46 ex. VAT
Alloy 910 HDT Black by taulman 3D, the Schwarzenegger of the filament world! This material is strong, very strong @ 8,100 PSI Tensile Strength. A pure filament with natural strength, no additives or modifiers. Has the same wonderful printing characteristics as taulmans other fine filament range. Now even more heat resistant.
Want to be notified when this product is back in stock?
- Description
- What is Nylon?
- Additional information
- Reviews (1)
Description
10% Discount off the PolyBox when you purchase this item. (Keep your filaments moisture free, even when 3D printing).
Alloy 910 is a measurable advancement in 3D Printing materials technology from taulman3D. taulman Alloy 910 3D Printer Filament is the combined effort of chemical companies, extrusion manufactures and taulman3D to specifically develop a single material to meet as many high performance 3D Printing needs as possible. With a combined tensile strength higher than the strongest co-polyesters, the durability of Nylons, a shrinkage factor that rivals our t-glase, a vast range of chemical resistance and a 95C working range, you now have one solution easily printable at 245C.
Specifications:
Tensile Strength = 8,100PSI
Modulus PSI = 72,932
Max Elongation at break = 31%
Print Temperature = 245C – 250C
Nozzle size = Any – There are no particulates or additives in Alloy 910
Tg = 82C
Print Bed =
Cold = BuildTak with coat of PVA
Hot = Glass heated to 45C with coat of PVA
(PVA is 50% water and 50% “Elmers Glue All”)
Shrinkage = 0.0033 in/in
Transmission = 75%
Color = Clear w/Subtle Amber – May be dyed with acid based dyes.
Nylon
Overview
Highly durable, flexible material.
Nylon has high impact and abrasion resistance; offering a high amount of tensile strength whilst also being a flexible material. It is one of the most heat-stable filaments, remaining unchanged in high temperature environments.
It is hygroscopic, meaning that the filament will absorb moisture easily which will cause prints to warp and fail. This can be circumvented by keeping the filament in an air-tight, dry environment. Nylon can warp easily; depending on the printer and slicer used, some trial and error may be needed to prevent this. Printed items will degrade from UV radiation if left in sunlight for long periods of time.
Used for: Gears, Screws, and Cable ties.
Some manufacturers provide PA6 & PA12 Nylons, PA12 has increased moisture stability and is more resistant to moisture absorption. The same applies to Nylon 66 compared to Nylon 6.
Printability
Difficult
Pros
- High Strength
- Flexible Material
- Heat Resistant
Cons
- High Temperature Required
- Warps Easily
- Vulnerable to Sunlight
Recommended Settings
Print Temp
Cooling Fan Off
Temp may vary on brand
Bed Temp
Temp may vary on brand
Print Surface
Heated Bed Required
Enclosure Required
Example Prints
Additional information
| Weight | 0.5 kg |
|---|---|
| Dimensions | 210 × 210 × 115 mm |
| Filament Brand | taulman 3D |
| Filament Colour | Black |
| Filament Diameter | 1.75mm |
| Filament Type | Nylon |
| Filament Weight | 1Lbs |
| Filament Weight | 500gms |
1 review for Alloy 910 HDT Black 1.75mm 1lbs 3D Printer Filament
Add a review
You must be logged in to post a review.
Paul Cookson –
Nice easy printing with Nylon.
I dried my spool for 8 hours in the oven at 70C and printed from a drying box. The 285C recommended produced some stringing but 280C was perfect. The 100% fill parts I printed were basically indestructible with a good finish. A little surprised I was able to print with this material so simply. I’ve had more trouble with PETG. Will buy again.