-9%
20% OFF

Artillery Genius Pro 3D Printer

Artillery Genius Pro 3D Printer

£289.00 £346.80 inc. VAT £231.20 £277.44 inc. VAT

In stock

£289.00 £346.80 inc. VAT £231.20 £277.44 inc. VAT

A great project to start your 3D Printing journey, Cost-effective and easy enough to assemble that we have seen an 8-year-old do it!

Availability: In stock SKU: 44873
View basket

Description

Artillery Genius 3D Printer

  • Powerful High-Quality Accessories – With touch screen control, Rapid Heating AC heat-bed, Ultra-quiet Stepper Driver. Direct-drive extruder to support flexible materials.
  • Power Failure Detection – Resume your printer after a power outage, goodbye to print job ruin by power failure to ensure your job possession.
  • Synchronized Dual Z System – Make sure both side of the gantry move ups and downs the same height and at the same speed, ensure the X carriage always move parallel to the build plate, even when one of the Z-stepper breaks down.
  • Fast Heating – Only Takes 130 seconds, the heated bed can reach up the 110 degrees, quite meet the requirement of printing various filaments.
  • Easy Installation and Stable Performance – 98% pre-assembled, easy for installation, with full aluminum frame design, very stable structure.

Upgraded Glass Bed

With a patented coating on its surface, Glass Bed has good adhesion and fast-speed heating functionality, operates smoothly even on the first layer.

Color Touch Screen

This screen outperforms others with its user-friendly interface, which offers you a trouble-free access to all different functions.

Super Quiet

A new Lattice glass as 3d printer platform, extremely flat surface, superb adhesion, a breeze to release the printed objects, fast and steady heated curve, tested and durable.

Resume Print Function

No more waste of time and materials! This product could resume automatically after unexpected power outage or consumerables exhaustion.

Fast Heating

Fast Heating – Only Takes 130 seconds, the heated bed can reach up the 110 degrees, quite meet the requirement of printing various filaments.

Large Build Volume:

300 x 200 x 200 mm build area allows you to create large and complex models.

Machine Dimensions: 43 x 39 x 51 cm / 43 x 39 x 59 cm / (with spool holder)

Shipping Box Dimensions: 54 x 44 x 32 cm

Machine Weight: 8900g

Shipping Weight: 10500g

Maximum Print Speed: 150m/s

Maximum Travel Speed: 250m/s

Artillery Limited Warranty

LAST DATE UPDATED: December 1, 2020

THIS LIMITED WARRANTY (“Limited Warranty”) applies to new and refurbished Artillery hardware devices (Artillery Sidewinder X1/ X2, Artillery Genius/ Genius Pro, Artillery Hornet) (collectively the “Products”) sold by ARTILLERY or a currently authorized reseller of Products (collectively “Authorized Party” or “Authorized Parties”).

LIMITED WARRANTY

From the date the Product is sold and delivered to an end-customer for the first time, as evidenced by the original customer’s purchase invoice, ARTILLERY warrants the Product is free from defects in material, design, and workmanship for a period of twelve (12) months. Only the original purchaser is entitled to claim warranty and the warranty period is limited to his/her lifetime. Consumable parts not covered are: heater cartridge, nozzle, DC fans, LED module, USB stick, flat flexible cable (FFC, or ribbon cable). “Consumables” are defined herein as disposable items, parts, or components of the Product which are inherently subject to deterioration and wear out during the normal operation of the Product. Electronic parts are warranted for a period of three(3) months. Electronic parts covered are: mainboard, TFT screen, TFT control board, solid-state relay, power supply unit, end-stop sensors, filament run-out sensor, breakout boards, AC heated bed. For AC heated bed, the glass is guaranteed with a flatness of 0.25mm (the difference between the highest point and lowest point).

VALID WARRANTY CLAIM

For a warranty claim to valid:
  1. notification must be made before the end of the applicable Warranty Period, as such Warranty Periods are defined below;
  2. the claim must accompany End-Customer logs and/or any documentation if requested by ARTILLERY; and
  3. the claim must be substantiated with original proof of purchase from an Authorized Party.

CLAIM HANDLING

Claims made pursuant to this Limited Warranty shall be administered as follows:
  1. the remedy shall be repair or replacement of the non-conforming hardware Product or non-conforming part(s) of a hardware Product in a commercially reasonable time by ARTILLERY or its authorized representative as solely determined by ARTILLERY;
  2. ARTILLERY shall bear the cost of replacement and the shipping costs incurred therein provided;
  3. Replacement parts or Products will either be new or refurbished.

EXCLUSIONS

ARTILLERY’s Limited Warranty obligations described herein shall terminate and shall not apply in any case where any alleged Product failure or other breaches of warranty was necessitated or caused in whole or in part by:
  1. physical damage sustained from improper handling during shipping as well as  normal wear and tear in use of the Product;
  2. improperly or incorrectly performed modifications, alterations or repairs;
  3. parts or Consumables were installed and used that were not certified or approved by ARTILLERY or its designated representative;
  4. unusual physical or electrical stress;
  5. abuse, misuse, accident, neglect;
  6. exposure to moisture, flooding, fire, electrical problems associated with incoming power or other acts not the fault of ARTILLERY;
  7. not adhering to ARTILLERY’s recommended maintenance procedures or failure to comply with Product instructions and/or documentation;
  8. to the extent allowed by applicable law, the Product has been removed from the country or region where it was originally sold by ARTILLERY or its designated representative.
This Limited Warranty shall not apply if ARTILLERY is not notified of an alleged defect or malfunction prior to the expiration of the applicable Warranty Period. ARTILLERY shall make the final determination as to the existence and cause of any alleged defect.

HOW TO GET WARRANTY SERVICE
If there are any issues with the product please feel free to call us on 01702 611 027 or email us at enquiries@3dfilaprint.com;  Email us with your Order ID and Pictures or Video.

LIMITATIONS/DISCLAIMERS

Artillery where permitted by law. Except for this limited warranty, artillery makes no other warranties whether express or implied by law, course of dealing, course of performance, usage of trade or otherwise, with regard to the performance of any product, without limitation of the foregoing, all implied warranties, including the warranty of merchantability or fitness for a particular purpose, are hereby excluded. Artillery waives all liability for any indirect, incidental, collateral, exemplary, punitive, special or consequential damages, including loss of use or loss of profits, even if artillery has been advised of the possibility of such claims or damages.

STATUTORY WARRANTY OR GUARANTEE RIGHTS

This Limited Warranty does not affect an End-Customer’s statutory warranty or guarantee rights; it is granted in addition thereto.
* ARTILLERY offers this Limited Warranty on Products purchased through its Authorized Parties. This Limited Warranty does not extend to products purchased from any unauthorized resellers.

After-Sale Service:

If there are any issues with the product please feel free to call us on 01702 611 027 or email us at enquiries@3dfilaprint.com;  Email us with your Order ID and Pictures or Video.

Additional information

Weight2 kg
Data Input

STL/OBJ/3MF/FPP/BMP/JPEG/JPG/PNG –

Extruder

Single Extruder

Filament Type

PLA 1.75mm –

Layer Resolution

0.1mm-0.3mm

Printing size

100*100*100mm

Reviews

There are no reviews yet.


Be the first to review “Artillery Genius Pro 3D Printer”

The maximum upload file size: 5 MB. You can upload: image, audio, video, document, spreadsheet, interactive, text, archive, code, other. Links to YouTube, Facebook, Twitter and other services inserted in the comment text will be automatically embedded. Drop file here