![cpe-hg100-morning-sun-transparent-co-polyester-1.75mm-3d-printer-filament-[2]-13256-1-p](https://3dfilaprint.com/wp-content/uploads/2021/10/cpe-hg100-morning-sun-transparent-co-polyester-1.75mm-3d-printer-filament-2-13256-1-p-150x150.jpg)
![CPE-HG100-Morning-Sun-Transparent-co-polyester-1.75mm-3D-Printer-Filament-[3]-13256-p](https://3dfilaprint.com/wp-content/uploads/2021/10/CPE-HG100-Morning-Sun-Transparent-co-polyester-1.75mm-3D-Printer-Filament-3-13256-p-150x150.jpg)
![cpe-hg100-black-soul-co-polyester-1.75mm-3d-printer-filament-[5]-13226-p](https://3dfilaprint.com/wp-content/uploads/2021/10/cpe-hg100-black-soul-co-polyester-1.75mm-3d-printer-filament-5-13226-p-150x150.jpg)
Fillamentum CPE HG100 Morning Sun Transparent co-polyester 1.75mm 3D Printer Filament
£32.87 £27.39 ex. VAT
A co-polyester material engineered for quality and easy printing, with features that will dwarf all PET based materials.
- Description
- What is PET-G?
- Additional information
- Spool Dimensions
- Reviews (0)
Description
Fillamentum CPE (co-polyester) is a high-technical material for the FFF (also known as FDM) 3D printing technology. A super chemical resistant filament, prefect for prototyping.
Engineered for quality and easy printing with features that will dwarf all PET based materials.
This co-polyester contains bio based monomer and can be recycled. Therefore, it is a human-friendly and eco-friendly material. For all the colours in this filament range Fillamentum guarantee FDA certification.
Fillamentum CPE HG100 has great optical properties, very high gloss and clarity. The transparency and strength are also preserved in thin-wall prints from transparent colors.
Summary of characteristics:
- High impact strength (no break) and higher hardness
- High tensile strength and thermal resistance
- FDA approved and 100% recyclable material
- BPA free and environmentally friendly
- No warping, easy and clean printing
- No odours or fumes while printing
- Stronger than PLA, durable as ABS
- Excellent layer to layer adhesion and adhesion to other materials, suitable for multi material printing
- Great transparency when using thin layers/walls
- Great chemical resistance
Thermal properties | Typical Value | Test Method | Test Condition |
Heat distortion temperature | 80 °C | ASTM D648 | 0,455 MPa |
Glass transition temperature | 90 °C | ASTM D1525 |
|
Optical properties | Typical Value | Test Method | Test Condition |
Haze | < 1,0 % | ASTM D1003 |
|
Transmittance | 90 % | ASTM D1003 |
|
Printing properties | Typical Value | Test Method | Test Condition |
Print temperature | 250280 °C |
|
|
Heated platform | 7080 °C |
|
|
Print speed | 50 mm/sec |
|
|
° The length of CPE filaments (1.75 mm, 750 g) is 254 m
° The length of CPE filaments (2.85 mm, 750 g) is 97 m
PET-G
Overview
A versatile middle ground between PLA and ABS.
PET-G Is stronger than PLA but easier to print with than ABS. The glycol in this material makes the filament less brittle and resistant to water, chemicals, and solvents. It is naturally clear, making it the go-to filament for translucent prints.
The strength and durability of a PET-G filament vary depending on the brand. An easy way to check if one PET-G is stronger than another is by comparing the tensile strength value of each filament. If printed in a sterile, FDA-approved environment, PET-G can be used to create food-safe prints.
Due to its strong and durable nature, PET-G can be difficult to finish with post-processing methods such as sanding. Prints may also be difficult to paint or glue together. Depending on printer and slicer settings, you may experience small hairs over the surface of prints caused by stringing. These can be removed with a heat gun or lighter.
Used for: Water Bottles, Plant Pots.
Printability
Medium
Pros
- Water Resistant
- Naturally Translucent
- Decent Strength and Durability
Cons
- Printer Tuning Required
- Difficult to Post-Process
- Stringing can Occur
Recommended Settings
Print Temp
Cooling Fan On
Temp may vary on brand
Bed Temp
Temp may vary on brand
Print Surface
No Heated Bed Required
No Enclosure Required
Example Prints
Additional information
| Weight | 0.75 kg |
|---|---|
| Dimensions | 210 × 210 × 75 mm |
| Filament Brand | Fillamentum |
| Filament Colour | Gold |
| Filament Diameter | 1.75mm |
| Filament Type | Co-polyester, PETG |
| Filament Weight | 750gms |
| Filament Weight | 750gms |
| Filament Range | Fillamentum CPE HG100 |
Be the first to review “Fillamentum CPE HG100 Morning Sun Transparent co-polyester 1.75mm 3D Printer Filament”
You must be logged in to post a review.
Reviews
There are no reviews yet.