Enviro PETG Orange 1.75mm

Enviro PETG Orange 1.75mm

£34.91 £29.09 ex. VAT

Out of stock

£34.91 £29.09 ex. VAT

Taulman 3D – t-glase is strong and easy to print, FDA approved, Odourless, low shrinkage, with excellent bridging capabilities. Available in both 1.75mm & 2.85mm. 

Availability: Out of stock SKU: 44454

Want to be notified when this product is back in stock?


taulman3D is pleased to offer their customers an entirely new line of 100% recycled polymers for 3d printing.  Every product in the Enviro filament line is made with fully recycled plastic feedstock and sits on 100% recycled cardboard spools. Tens of thousands of parts have been 3d printed with this 100% recycled PETG filament, offering their customers a way to 3d print more parts and impact the environment less.

FULLY RECYCLED FILAMENTS AND SPOOLS Fully recycled plastic feedstock on fully recycled cardboard spools.  In addition to the plastic being fully recycled, all spools in the Enviro line are made from fully recycled cardboard.
​​REDUCE PLASTIC WASTE AND ENERGY CONSUMPTION When standard PETG filaments are used, new plastics enter our environment.  By using Enviro PETG, we’re significantly reducing plastic waste and energy consumption tied to new resin production. Tens of thousands of pounds of plastic have already been saved in the development and initial production of Enviro PETG.  Every roll purchased furthers the goal of reducing plastic waste.
A TRULY UNIQUE OFFERING We looked around the world and found a few problems with existing “recycled” filaments.  They use a small percentage of recycled plastic, do not print well or only use cardboard spools with virgin resin. taulman3D set out to offer a completely recycled product, from the filament to spool and tested Enviro PETG on dozens of printing platforms to ensure consistency and quality.



A versatile middle ground between PLA and ABS.

PET-G Is stronger than PLA but easier to print with than ABS. The glycol in this material makes the filament less brittle and resistant to water, chemicals, and solvents. It is naturally clear, making it the go-to filament for translucent prints. 
The strength and durability of a PET-G filament vary depending on the brand. An easy way to check if one PET-G is stronger than another is by comparing the tensile strength value of each filament. If printed in a sterile, FDA-approved environment, PET-G can be used to create food-safe prints.

Due to its strong and durable nature, PET-G can be difficult to finish with post-processing methods such as sanding. Prints may also be difficult to paint or glue together. Depending on printer and slicer settings, you may experience small hairs over the surface of prints caused by stringing. These can be removed with a heat gun or lighter.

Used for: Water Bottles, Plant Pots.









Recommended Settings

Print Temp

220°C -250°C

Cooling Fan On

Temp may vary on brand

Bed Temp

60°C – 80°C

Temp may vary on brand

Print Surface

No Heated Bed Required
No Enclosure Required

Example Prints

Additional information

Weight0.5 kg
Dimensions210 × 210 × 115 mm
Filament Brand

taulman 3D

Filament Colour


Filament Diameter


Filament Type


Filament Weight


Filament Weight


Filament Range

Taulman t-glase


There are no reviews yet.

Be the first to review “Enviro PETG Orange 1.75mm”