Enviro PETG White 2.85mm
£29.09 £34.91 inc. VAT £10.00 £12.00 inc. VAT
Taulman 3D – t-glase is strong and easy to print, FDA approved, Odourless, low shrinkage, with excellent bridging capabilities. Available in both 1.75mm & 2.85mm.
Want to be notified when this product is back in stock?
- Description
- What is PET-G?
- Additional information
- Reviews (0)
Description
taulman3D is pleased to offer our customers an entire new line of 100% recycled polymers for 3d printing. Every product in the Enviro filament line is made with fully recycled plastic feedstock and sits on 100% recycled cardboard spools.
Tens of thousands of parts have been 3d printed with this 100% recycled PETG filament, offering our customers a way to 3d print more parts and impact the environment less.
FULLY RECYCLED FILAMENTS AND SPOOLS
Fully recycled plastic feedstock on fully recycled cardboard spools. In addition to the plastic being fully recycled, all spools in the Enviro line are made from fully recycled cardboard.
REDUCE PLASTIC WASTE AND ENERGY CONSUMPTION
When standard PETG filaments are used, new plastics enter our environment. By using Enviro PETG, we’re significantly reducing plastic waste and energy consumption tied to new resin production.
Tens of thousands of pounds of plastic have already been saved in the development and initial production of Enviro PETG. Every roll purchased furthers the goal of reducing plastic waste.
A TRULY UNIQUE OFFERING
We looked around the world and found a few problems with existing “recycled” filaments. They use a small percentage of recycled plastic, do not print well or were only using carboard spools with virgin resin.
taulman3D set out to offer a completely recycled product, from filament to spool, and tested Enviro PETG on dozens of printing platforms to ensure consistency and quality.
PET-G
Overview
A versatile middle ground between PLA and ABS.
PET-G Is stronger than PLA but easier to print with than ABS. The glycol in this material makes the filament less brittle and resistant to water, chemicals, and solvents. It is naturally clear, making it the go-to filament for translucent prints.
The strength and durability of a PET-G filament vary depending on the brand. An easy way to check if one PET-G is stronger than another is by comparing the tensile strength value of each filament. If printed in a sterile, FDA-approved environment, PET-G can be used to create food-safe prints.
Due to its strong and durable nature, PET-G can be difficult to finish with post-processing methods such as sanding. Prints may also be difficult to paint or glue together. Depending on printer and slicer settings, you may experience small hairs over the surface of prints caused by stringing. These can be removed with a heat gun or lighter.
Used for: Water Bottles, Plant Pots.
Printability
Medium
Pros
- Water Resistant
- Naturally Translucent
- Decent Strength and Durability
Cons
- Printer Tuning Required
- Difficult to Post-Process
- Stringing can Occur
Recommended Settings
Print Temp
Cooling Fan On
Temp may vary on brand
Bed Temp
Temp may vary on brand
Print Surface
No Heated Bed Required
No Enclosure Required
Example Prints
Additional information
| Weight | 0.5 kg |
|---|---|
| Dimensions | 210 × 210 × 115 mm |
| Filament Brand | taulman 3D |
| Filament Colour | White |
| Filament Diameter | 2.85mm |
| Filament Type | PETG |
| Filament Weight | 1kg |
| Filament Weight | 1Kg |
| Filament Range | Taulman t-glase |
Be the first to review “Enviro PETG White 2.85mm”
You must be logged in to post a review.
Reviews
There are no reviews yet.