eSUN eFlex 87A Natural Clear Flexible 1.75mm 3D Printing filament Sample
£3.00 £2.50 ex. VAT
TPU material has good flexibility, high tear resistance and wear resistance and cut resistance, sturdiness and durability; TPU filament has high hardness and good resilience, can be used for insoles and other applications.
Want to be notified when this product is back in stock?
- Description
- Additional information
- Reviews (0)
Description
TPU material has good flexibility, high tear resistance and wear resistance and cut resistance, sturdiness and durability; TPU filament has high hardness and good resilience, can be used for insoles and other applications.
| Filament Properties Table | |
|---|---|
| 3D PRINTING FILAMENT | eFlex(TPU-87A) |
| Density(g/cm3) | 1.12 |
| Heat Distortion Temp(℃,0.45MPa) | / |
| Melt Flow Index(g/10min) | / |
| Tensile Strength(MPa) | 52 |
| Elongation at Break(%) | 500 |
| Flexural Strength(MPa) | / |
| Flexural Modulus(MPa) | / |
| IZOD Impact Strength(kJ/㎡) | / |
| Durability | 9/10 |
| Printability | 6/10 |
| Recommended printing parameters | |
| Extruder Temperature(℃) | 220 – 250℃ Recommended temperature：240℃ |
| Bed temperature(℃) | 45 – 60°C |
| Fan Speed | 100% |
| Printing Speed | 20 – 50mm/s |
| Heated Bed | Optional |
| Recommended Build Surfaces | Masking paper, PVP solid glue, PEI |
The transparent flexible TPU consumables with a hardness of 87A are strong and durable; the printed product is softer than TPU-95A, but harder than the eLastic printed product; the printed product has a certain degree of transparency. Vacuumed Sealed Packaging: Antioxidants + Vacuum Packaging + Product Manual Easily keep your 3D printer filaments at an optimal storage condition and free from dust or dirt before opening the vacuumed sealed packaging. 1. It is recommended to dry the printing (55℃/＞4H) to achieve the best printing effect. It is recommended to use it with eBOX cartridges when printing. 2. It is recommended to use a short-range two-wheel reduction extruder designed for flexibility, eTPU-95A materials are usually difficult to print on a remote extrusion machine. The remote extruder can try to print at a slower speed at 20mm/s or even slower. 3. The nozzle may have impurities after printing for a long time. It is recommended to use it with the cleaning filament. If necessary, replace the nozzle and throat with a new one. 
Additional information
| Weight | 0.035 kg |
|---|---|
| Filament Brand | eSUN |
| Filament Colour | Clear |
| Filament Diameter | 1.75mm – 10 Meters |
| Filament Type | TPU 83A |
| Filament Weight | 1Kg |
Be the first to review “eSUN eFlex 87A Natural Clear Flexible 1.75mm 3D Printing filament Sample”
You must be logged in to post a review.
Reviews
There are no reviews yet.