eSUN ePLA Gloss Red 1.75mm 3D Printing filament Sample
£2.50 £3.00 inc. VAT
ePLA is a PLA material with high cost-effective ,environment-friendly,and Easy to print
- Description
- What is PLA?
- Additional information
- Reviews (0)
Description
ePLA is a PLA material with high cost-effective ,environment-friendly,Easy to print.Compared with ABS, ePLA has higher rigidity and strength similar to PC, no need to close the cavity, low shrinkage rate, no warping, no cracking, and can print large size model;Compared with other materials, the support is easier to remove from the model, and the surface of the printed model is smooth and flat;No pungent smell when printing, safe and environmental friendly;The spool is made of plastic injection molding based on production waste and industrial waste such as PETG, ABS and PLA. The outer box is made of recyclable paper box. The concept of environmental friendly makes 3D printing more sustainable.Shinny and smooth surface;The filament is hard to break, long time printing smooth without plug, can be used for conceptual model, rapid prototyping.
PLA
Overview
PLA is easy to print, at low cost. Non-toxic and Eco friendly. A perfect starting point for people new to 3D printing.
PLA is created from all-natural renewable resources, and under the correct conditions, is fully biodegradable. This material is typically used for prototypes or decorative prints; Due to the low temperatures and ease of use, features tend to print sharper and more detailed. Its non-toxic nature means that it can be printed for food and medical applications if done so from a sterile and sanitized environment.
However, PLA prints are prone to snapping and breaking under pressure, and become damaged and discolored from high temperatures and prolonged exposure to sunlight or water.
Used for: Design prototypes, Plastic Cups, Medical Implants, Food containers.
Printability
Very Easy
Pros
-
Low Cost -
Easy to Print -
Eco Friendly -
Does Not Warp
Cons
-
Less robust than other materials -
Vulnerable to Water and sunlight
Recommended Settings
Print Temp
180°C -210°C
Cooling Fan on
Temp may vary on brand
Bed Temp
Temp may vary on brand
Print Surface
No Heated Bed Required
No Enclosure Required
Example Prints
Additional information
| Weight | 0.035 kg |
|---|---|
| Filament Brand | eSUN |
| Filament Colour | Red |
| Filament Diameter | 1.75mm – 10 Meters |
| Filament Length | 340~350 Metres |
| Filament spool weight | 1Kg |
| Filament Type | PLA |
Reviews
There are no reviews yet.