![esun-pla-white-silk-1.75mm-1kg-3d-printing-filament-[3]-26139-1-p](https://3dfilaprint.com/wp-content/uploads/2021/10/esun-pla-white-silk-1.75mm-1kg-3d-printing-filament-3-26139-1-p-150x150.jpg)
![esun-pla-white-silk-1.75mm-1kg-3d-printing-filament-[4]-26139-1-p](https://3dfilaprint.com/wp-content/uploads/2021/10/esun-pla-white-silk-1.75mm-1kg-3d-printing-filament-4-26139-1-p-150x150.jpg)
![esun-pla-yellow-silk-1.75mm-1kg-3d-printing-filament-[6]-26181-p](https://3dfilaprint.com/wp-content/uploads/2021/10/esun-pla-yellow-silk-1.75mm-1kg-3d-printing-filament-6-26181-p-150x150.jpg)
eSUN ePLA Matte Peach Pink 1.75mm 3D Printing Filament
£17.99 £21.59 inc. VAT £16.19 £19.43 inc. VAT
ePLA-Matte is a cost-effective matte PLA filament that is more environmentally friendly and easy to print. Compared with ABS, matte PLA has higher rigidity and PC-like strength and does not require a closed cavity. PLA matte filament has low shrinkage, no warping and no cracking quality, and is suitable for large-size model printing.
- Description
- What is PLA?
- Additional information
- Reviews (0)
Description
Description
Matte PLA filament has no smell when printing; the spool is made by reusing injection moulding of PETG, ABS, PLA production waste and other industrial waste, and the outer box is made of recyclable paper. Make 3D printing more sustainable with the environmental protection concept; The matte PLA surface is delicate and does not show layer lines; The filament is tough which made which reduces the possibility of blockages. PLA matte filament can be used for early concept models and rapid prototyping.
Features
Environmental friendly
Cost-effective
High-speed printing
Supports are easy to remove
Excellent printability
Hard to break
Matte surface effect
Low density
| Filament Properties Table | |
|---|---|
| 3D PRINTING FILAMENT | ePLA-Matte |
| Density(g/cm3) | 1.174 |
| Heat Distortion Temp(℃,0.45MPa) | 51 |
| Melt Flow Index(g/10min) | 2.1（190℃/2.16kg） |
| Tensile Strength(MPa) | 34.56 |
| Elongation at Break(%) | 56.1 |
| Flexural Strength(MPa) | 41.21 |
| Flexural Modulus(MPa) | 1119.41 |
| IZOD Impact Strength(kJ/㎡) | 33.15 |
| Durability | 4/10 |
| Printability | 9/10 |
| Recommended printing parameters | |
| Extruder Temperature(℃) | 190 – 230℃ Recommended temperature 215℃ |
| Bed temperature(℃) | 45 – 60°C |
| Fan Speed | 100% |
| Printing Speed | 40 – 100mm/s |
| Heated Bed | Optional |
| Recommended Build Surfaces | Masking paper, PVP solid glue, PEI |
How to Store:
1. If you are going to leave your printer inactive for more than a couple of days, please retract the filament to protect your printer nozzle.
2. In order to extend the life of your filament, please place the unsealing filament back to the original vacuum bag and stock it in a cool and dry place.
3. When storing your filament, please feed the loose end through the holes on the edge of the filament reel to avoid winding, so that it feeds properly the next time you are ready to print.
Please Notice: the picture shown is a representation of the item, colour may vary slightly due to the colour setting of each individual monitor. Please double-check the size and colour before purchasing.
PLA
Overview
PLA is easy to print, at low cost. Non-toxic and Eco friendly. A perfect starting point for people new to 3D printing.
PLA is created from all-natural renewable resources, and under the correct conditions, is fully biodegradable. This material is typically used for prototypes or decorative prints; Due to the low temperatures and ease of use, features tend to print sharper and more detailed. Its non-toxic nature means that it can be printed for food and medical applications if done so from a sterile and sanitized environment.
However, PLA prints are prone to snapping and breaking under pressure, and become damaged and discolored from high temperatures and prolonged exposure to sunlight or water.
Used for: Design prototypes, Plastic Cups, Medical Implants, Food containers.
Printability
Very Easy
Pros
- Low Cost
- Easy to Print
- Eco Friendly
- Does Not Warp
Cons
- Less robust than other materials
- Vulnerable to Water and sunlight
Recommended Settings
Print Temp
180°C -210°C
Cooling Fan on
Temp may vary on brand
Bed Temp
Temp may vary on brand
Print Surface
No Heated Bed Required
No Enclosure Required
Example Prints
Additional information
| Weight | 1 kg |
|---|---|
| Dimensions | 210 × 210 × 75 mm |
| Filament Brand | eSUN |
| Filament Colour | Pink |
| Filament Diameter | 1.75mm |
| Filament Length | 340~350 Metres |
| Filament spool weight | 1Kg |
| Filament Type | PLA |
| Filament Weight | 1Kg |
| Filament Range | ePLA Matte |
Be the first to review “eSUN ePLA Matte Peach Pink 1.75mm 3D Printing Filament”
You must be logged in to post a review.
Reviews
There are no reviews yet.