eSUN High Temp Resin Transparent 500gms

eSUN High Temp Resin Transparent 500gms

£26.00 £31.20 inc. VAT

In stock

£26.00 £31.20 inc. VAT

eSUN High Precision Red Orange Wax Resin for Photon UV Curing LCD printers.

Availability: In stock SKU: 69225722111
View basket

Description

Compatible with a wide range of quality 3D Desktop resin printers, which work using LCD on the 405nm wavelength, such as the Anycubic, Elegoo and Nova, printers, the eSUN Precision Resin is a must for those looking for ultra sharp high detail and strong 3D resin prints.

Good temperature resistance, can be heated for a long time at 120℃ or boiled at 100℃. With high hardness, high strength and high rigidity, high precision, fully cured model has excellent mechanical properties and temperature resistance.
Can be used for high temperature dental mold, to meet the needs of dental model assembly and manufacturing of fine, high temperature and low deformation.

 

D PRINTING PHOTOPOLYMER RESIN Properties Table
3D PRINTING PHOTOPOLYMER RESINHigh Temp Resin
Viscosity(mPa·s)180-220
Density(g/cm3)1.09-1.10
Tensile Strength(MPa)70-85
Elongation at Break(%)35-40
Flexural Strength(MPa)95-105
Impact Strength(J/m)/
Tearing Strength(GPa)/
Heat Distortion Temp(℃)100.5(After printing, place in a 150℃ oven for 30 minutes)
Hardness(Shore D)82-84
Grades (out of 10)
Strength(S)10
Toughness(F)8
Forming(P)8
Accuracy(S)7
Speed (A)8

 

1.Shake well before printing
2.After printing, it should be fully cured (more than 10min), and then put in the oven at 150℃ for 30min. The support can be removed after the post-processing
3. The wall thickness of the heat-resistant parts can be as thick as possible to achieve the heat-resistant performance, and the heat treatment time in the oven should not be too long

Recommended printing parameters
SettingsMachine Type
Low Light IntensityMedium Light IntensityHigh Light Intensity (Monochrome LCD Screen)
Representative MachineAnyCubic PhotoneSUN LCD 3.0
Nova Bene 4
Creality LD-002R
Anycubic MONO X
ELEGOO Saturn
Phrozen Sonic Mini
Exposure Time/s8-105-6Not recommended
Bottom Layer Count3-5
Bottom Exposure Time40-6030-40Not recommended
Lifting Distance/mm5.5&6-inch screen:5-6 or Higher;  8.9&13.3-inch screen:8-12 or Higher
Lift Speed/mm·min-1 90-150 90-120 Not recommended
Retract Speed/mm·min-1   150-200

 

How to Store your resin:

  • 1) Keep away from light seals at room temperature. (Sunshine contains a lot of UV light, will solidify photosensitive resin.)
  • 2) It is recommended to store the resin under 15C -35 in a sealed container. Avoid any dusty or moist environment.
  • 3) The resin is stable under different climatic conditions and is also easy to store, overcoming the shortcomings of other resins easily damp softening and environmental corrosion.

Safe Packaging:

  • Thickened aluminium bottle completely protected from light. Leak-proof bottle fully wrapped with a plastic bubble bag to make sure the resin stays in place where they belong.

Please Note:

  • The pictures shown are a representation of the item, colour may vary slightly due to the colour setting of each individual monitor. Please double check the size and colour before purchasing.

Additional information

Weight0.5 kg
Bottle Size

500gms

Bottle Size mls

0.4345L

Operating wavelength

405nm

Printer Type

LCD

Resin Brand

eSUN

Resin Colour

Transparent Yellow

Resin Type

High Temp

Reviews

There are no reviews yet.


Be the first to review “eSUN High Temp Resin Transparent 500gms”

The maximum upload file size: 5 MB. You can upload: image, audio, video, document, spreadsheet, interactive, text, archive, code, other. Links to YouTube, Facebook, Twitter and other services inserted in the comment text will be automatically embedded. Drop file here