eSUN PETG Blue REFILL 1.75mm 1Kg 3D Printing filament
£13.50 £16.20 inc. VAT
- Description
- What is PET-G?
- Additional information
- Reviews (0)
Description
Characteristics – Odorless;little shrinkage rate; – Hydrophobicity(Will not absorb water and as such clog the extruders); – Outstanding toughness and high impact strength; – Good liquidity(flows smoothly); – High mechanical strength and excellent flexibility; – Recyclable.
PET-G
Overview
A versatile middle ground between PLA and ABS.
PET-G Is stronger than PLA but easier to print with than ABS. The glycol in this material makes the filament less brittle and resistant to water, chemicals, and solvents. It is naturally clear, making it the go-to filament for translucent prints.
The strength and durability of a PET-G filament vary depending on the brand. An easy way to check if one PET-G is stronger than another is by comparing the tensile strength value of each filament. If printed in a sterile, FDA-approved environment, PET-G can be used to create food-safe prints.
Due to its strong and durable nature, PET-G can be difficult to finish with post-processing methods such as sanding. Prints may also be difficult to paint or glue together. Depending on printer and slicer settings, you may experience small hairs over the surface of prints caused by stringing. These can be removed with a heat gun or lighter.
Used for: Water Bottles, Plant Pots.
Printability
Medium
Pros
-
Water Resistant -
Naturally Translucent -
Decent Strength and Durability
Cons
-
Printer Tuning Required -
Difficult to Post-Process -
Stringing can Occur
Recommended Settings
Print Temp
Cooling Fan On
Temp may vary on brand
Bed Temp
Temp may vary on brand
Print Surface
No Heated Bed Required
No Enclosure Required
Example Prints
Additional information
| Weight | 1 kg |
|---|---|
| Filament Brand | eSUN |
| Filament Colour | Blue |
| Filament Diameter | 1.75mm |
| Filament Type | PETG |
| Filament Weight | 1Kg |
| Filament Range | eSUN PETG |
Reviews
There are no reviews yet.