eSUN PLA+ Grey 1.75mm 1Kg 3D Printing filament
£16.60 £19.92 inc. VAT £14.94 £17.93 inc. VAT
A quality PLA from the manufacturer eSUN. PLA + is tougher and less brittle than regular PLA, with, as expected, no warping or delamination issues. Available in a wide range of colours at an affordable price,
- Description
- What is PLA?
- Additional information
- Reviews (3)
Description
eSun’s PLA+ is environment-friendly, which is easy to print and has a smooth surface. PLA+ filament has good strength, rigidity, toughness balance, and strong impact resistance; So pla plus is considered suitable for functional parts printing. eSUN pla+ is approved by FDA, and safer to use; PLA pro can be used for modelling, and rapid prototyping.
The eSun PLA + 3D printer filament can be printed on the majority of 3D Desktop FDM printers, such as the Ultimaker, Prusa, Makerbot, Creality, Ender, Craftbot, e3DTool Changer, Flashforge, BambuLab and many other leading manufacturers of 3D Desktop printers.
Check out the smooth surface of the eSUN PLA + 3D Printing filament.
PLA+ Filament Printing Parameters
Printing Temperature: 205-225
Bed Temperature: 25-70
Density: 1.24 g / cm3
Melt Flow Index: 2 (190 ∞ C / 2.16kg) g / 10min
Tensile Strength: 60 Mpa
Elongation at Break: 29%
Bending Strength: 87 Mpa
Flexural Modulus: 3642 Mpa
lZOD Impact Strength: 7 KJ /
Heat Deflection Temperature: 52 (∞ C, 0.45Mpa)
Advantages of PLA+ Filament
Environment-friendly, Non-toxic & Low Odour.
High Strength. Better Toughness. Low Shrinkage.
No Print Head Clogging, Shiny Surface.
Multiple Colours to Choose from.
Compatible with Most FDM 3D Desktop Printers.
Vacuumed Sealed Packaging:
Easily keep your 3D printer filaments in optimal storage conditions and free from dust or dirt.
Package Includes:
Antioxidants + Vacuum Packaging + Product Manual
How to Store:
1. If you are going to leave your printer inactive for more than a couple of days, please retract the filament to protect your printer nozzle.
2. In order to extend the life of your filament, please place the unsealing filament back into a vacuum bag and stock it in a cool and dry place. If you don’t have a resealable bag why not try the eVacuum Kit
3. When storing your filament, please feed the loose end through the holes on the edge of the filament reel to avoid winding, so that it feeds properly the next time you are ready to print.
eVacuum Kit for FDM 3D Printing Filament Spools
£11.20A great device for helping to keep your 3D printing filaments dry and dust free.
Please Note: That the picture shown is a representation of the item, colour may vary slightly due to the colour setting of each individual monitor. Please double-check the size and colour before purchasing.
Additional information
Weight | 1 kg |
---|---|
Dimensions | 210 × 210 × 75 mm |
Filament Brand | eSUN |
Filament Colour | Grey |
Filament Diameter | 1.75mm |
Filament Length | 340~350 Metres |
Filament spool weight | 1Kg |
Filament Type | PLA |
Filament Weight | 1Kg |
Filament Range | eSUN PLA+ |
3 reviews for eSUN PLA+ Grey 1.75mm 1Kg 3D Printing filament
Add a review
You must be logged in to post a review.
Geoff Cusick –
Good quality filament
Consistent quality. Good surfaces, better strength than ordinary PLA. Competitive prices.
Lloyd Housley –
Great Results
This material produces some stunning results with a lovely matte finish. I did ,however, encounter a lot of stringing initially when printing at the recommended temperature. I tried moving up and down in the range and settled on 200C which is 5 degrees lower than the recommended minimum. This coaster was printed at 200C with virtually no stringing and excellent bed adhesion especially given the lattice base.
Adrian Hawley –
Consistently good
Consistantly good and delivers a nice result. i am very happy with it