eSUN eSILK PLA Jacinth 1.75mm 3D Printing filament Sample

eSUN eSILK PLA Jacinth 1.75mm 3D Printing filament Sample

£3.00 £2.50 ex. VAT

Out of stock

£3.00 £2.50 ex. VAT

A truly distinctive Silk finish PLA 3D printing filament. Tough, durable and suitable for outdoor use, this material is definitely one to catch your eye.

Availability: Out of stock SKU: 6922572258037-S

Want to be notified when this product is back in stock?



eSUN, eSilk-pla is modified by adding materials with bright effects into PLA to make a beautiful shiny appearance . eSilk-PLA is similar to PLA filament, with good mechanical properties and added toughness, compared to regular PLA filament. It is also environmentally friendly and non-toxic.

The eSUN eSILK PLA can be widely used for large curved surface models and practical products, such as furniture accessories, indoor & outdoor decorations and many other practical uses. Due to its excellent printing performance and stunning appearance, the product received increasing attention across the global 3D printing market on its launch.


Violet Silk PLA definitely gives you an outstanding silk glossy smooth appearance.

Minimum tolerance and low warping to ensure consistent feeding and stable prints, no clogging, extremely high success rate, even on the most demanding prints, resulting in printed parts that have an outstanding surface finish with great dimensional accuracy.

A 1KG 3D printer filament reel, perfect roundness and very tight diameter tolerance, does not overlap or tangle. Melts evenly, no cracking, no bubbles. feeds smoothly on direct drive and Bowden setups and constantly without clogging the nozzle or extruder.

Compatible with most FDM 3D Printers, allowing you to print multicolour in one small 3D printed item. Perfect for arts & crafts projects, vases and any other 3D printed items that could benefit from a unique silky smooth appearance.

Vacuumed Sealed Packaging.


Filament information:

Printing Temperature: 190-220

Bed Temperature: No Heat or 60-80

Density: 1.43g/cm≥

Melt Flow Index: 2.5 (190°c/2.16kg) g/10min

Tensile Strength: 58MPa

Elongation at Break: 300%

Flexural Strength: 75MPa

Flexural Modulus: 4000MPa

IZOD Impact Strength: 4KJ/m≤

Heat Deflection Temperature: 67 (°c, 0.45MPa)


Easily keep your 3D printer filaments at an optimal storage condition and free from dust or dirt.

Package Includes:

Antioxidants + Vacuum Packaging + Product Manual

How to Store:

1. If you are going to leave your printer inactive for more than a couple of days, please retract the filament to protect your printer nozzle.

2. In order to extend the life of your filament, please place the unsealing filament back to original vacuum bag and stock it in a cool and dry place.

3. When storing your filament, please feed the loose end through the holes on the edge of the filament reel to avoid winding, so that it feeds properly the next time you are ready to print.

Please Notice: the picture shown is a representation of the item, colour may vary slightly due to the colour setting of each individual monitor. Please double check the size and colour before purchasing.





PLA is easy to print, at low cost. Non-toxic and Eco friendly. A perfect starting point for people new to 3D printing.

PLA is created from all-natural renewable resources, and under the correct conditions, is fully biodegradable. This material is typically used for prototypes or decorative prints; Due to the low temperatures and ease of use, features tend to print sharper and more detailed. Its non-toxic nature means that it can be printed for food and medical applications if done so from a sterile and sanitized environment. 
However, PLA prints are prone to snapping and breaking under pressure, and become damaged and discolored from high temperatures and prolonged exposure to sunlight or water. 

Used for: Design prototypes, Plastic Cups, Medical Implants, Food containers.






Very Easy



Recommended Settings

Print Temp

180°C -210°C

Cooling Fan on

Temp may vary on brand

Bed Temp

0°C – 45°C

Temp may vary on brand

Print Surface

No Heated Bed Required
No Enclosure Required

Example Prints

Additional information

Weight0.035 kg
Filament Brand


Filament Colour


Filament Diameter

1.75mm – 10 Meters

Filament Length

340~350 Metres

Filament spool weight


Filament Type



There are no reviews yet.

Be the first to review “eSUN eSILK PLA Jacinth 1.75mm 3D Printing filament Sample”