eSUN PLA Luminous Blue 1.75mm 1Kg 3D Printing filament
£16.60 £19.92 inc. VAT £14.94 £17.93 inc. VAT
PLA is an environment-friendly material that is easy to print and has smooth surface.Compared with ABS, PLA has higher rigidity and strength similar to PC, and does not need to close the cavity, low shrinkage rate, no warping, no cracking, and can print large size model;No pungent smell when printing, safe and environmental protection.Approved by FDA, safer to use;It can be used for conceptual model, rapid prototyping, and metal parts casting.
Want to be notified when this product is back in stock?
- Description
- What is PLA?
- Additional information
- Reviews (0)
Description
PLA is an environment-friendly material that is easy to print and has smooth surface. Compared with ABS, PLA has higher rigidity and strength similar to PC, and does not need to close the cavity, low shrinkage rate, no warping, no cracking, and can print large size model; No pungent smell when printing, safe and environmental protection. Approved by FDA, safer to use; It can be used for conceptual model, rapid prototyping, and metal parts casting.
Filament Properties Table | |
---|---|
3D PRINTING FILAMENT | PLA |
Density(g/cm3) | 1.2 |
Heat Distortion Temp(℃,0.45MPa) | 53 |
Melt Flow Index(g/10min) | 3.5(190℃/2.16kg) |
Tensile Strength(MPa) | 72 |
Elongation at Break(%) | 11.8 |
Flexural Strength(MPa) | 90 |
Flexural Modulus(MPa) | 1915 |
IZOD Impact Strength(kJ/㎡) | 5.4 |
Durability | 4/10 |
Printability | 9/10 |
Recommended printing parameters | |
Extruder Temperature(℃) | 190 – 230℃ Recommended temperature:215℃ |
Bed temperature(℃) | 45 – 60°C |
Fan Speed | 100% |
Printing Speed | 40 – 100mm/s |
Heated Bed | Optional |
Recommended Build Surfaces | Masking paper, PVP solid glue, PEI |
Vacuumed Sealed Packaging:
Easily keep your 3D printer filaments at an optimal storage condition and free from dust or dirt.
Package Includes:
Antioxidants + Vacuum Packaging + Product Manual
How to Store:
1. If you are going to leave your printer inactive for more than a couple of days, please retract the filament to protect your printer nozzle.
2. In order to extend the life of your filament, please place the unsealing filament back to original vacuum bag and stock it in a cool and dry place.
3. When storing your filament, please feed the loose end through the holes on the edge of the filament reel to avoid winding, so that it feeds properly the next time you are ready to print.
Please Notice: the picture shown is a representation of the item, colour may vary slightly due to the colour setting of each individual monitor. Please double check the size and colour before purchasing.
Additional information
Weight | 1 kg |
---|---|
Dimensions | 210 × 210 × 75 mm |
Filament Brand | eSUN |
Filament Colour | Blue |
Filament Diameter | 1.75mm |
Filament Length | 340~350 Metres |
Filament spool weight | 1Kg |
Filament Type | PLA |
Filament Weight | 1Kg |
Filament Range | eSUN ePLA |
Reviews
There are no reviews yet.