eSUN High Temp Resin Pink 500gms
£31.20 £26.00 ex. VAT
eSUN High Precision Red Orange Wax Resin for Photon UV Curing LCD printers.
- Description
- Additional information
- Reviews (0)
Description
Compatible with a wide range of quality 3D Desktop resin printers, which work using LCD on the 405nm wavelength, such as the Anycubic, Elegoo and Nova, printers, the eSUN Precision Resin is a must for those looking for ultra sharp high detail and strong 3D resin prints.
Good temperature resistance, can be heated for a long time at 120℃ or boiled at 100℃. With high hardness, high strength and high rigidity, high precision, fully cured model has excellent mechanical properties and temperature resistance.
Can be used for high temperature dental mold, to meet the needs of dental model assembly and manufacturing of fine, high temperature and low deformation.
| D PRINTING PHOTOPOLYMER RESIN Properties Table | |
|---|---|
| 3D PRINTING PHOTOPOLYMER RESIN | High Temp Resin |
| Viscosity(mPa·s) | 180-220 |
| Density(g/cm3) | 1.09-1.10 |
| Tensile Strength(MPa) | 70-85 |
| Elongation at Break(%) | 35-40 |
| Flexural Strength(MPa) | 95-105 |
| Impact Strength(J/m) | / |
| Tearing Strength(GPa) | / |
| Heat Distortion Temp(℃) | 100.5(After printing, place in a 150℃ oven for 30 minutes) |
| Hardness(Shore D) | 82-84 |
| Grades (out of 10) | |
| Strength（S） | 10 |
| Toughness（F） | 8 |
| Forming（P） | 8 |
| Accuracy（S） | 7 |
| Speed （A） | 8 |
1.Shake well before printing
2.After printing, it should be fully cured (more than 10min), and then put in the oven at 150℃ for 30min. The support can be removed after the post-processing
3. The wall thickness of the heat-resistant parts can be as thick as possible to achieve the heat-resistant performance, and the heat treatment time in the oven should not be too long
| Recommended printing parameters | |||
| Settings | Machine Type | ||
| Low Light Intensity | Medium Light Intensity | High Light Intensity (Monochrome LCD Screen) | |
| Representative Machine | AnyCubic Photon | eSUN LCD 3.0 Nova Bene 4 Creality LD-002R | Anycubic MONO X ELEGOO Saturn Phrozen Sonic Mini |
| Exposure Time/s | 8-10 | 5-6 | Not recommended |
| Bottom Layer Count | 3-5 | ||
| Bottom Exposure Time | 40-60 | 30-40 | Not recommended |
| Lifting Distance/mm | 5.5&6-inch screen：5-6 or Higher; 8.9&13.3-inch screen：8-12 or Higher | ||
| Lift Speed/mm·min-1 | 90-150 | 90-120 | Not recommended |
| Retract Speed/mm·min-1 | 150-200 | ||
How to Store your resin:
- 1) Keep away from light seals at room temperature. (Sunshine contains a lot of UV light, will solidify photosensitive resin.)
- 2) It is recommended to store the resin under 15C -35 in a sealed container. Avoid any dusty or moist environment.
- 3) The resin is stable under different climatic conditions and is also easy to store, overcoming the shortcomings of other resins easily damp softening and environmental corrosion.
Safe Packaging:
- Thickened aluminium bottle completely protected from light. Leak-proof bottle fully wrapped with a plastic bubble bag to make sure the resin stays in place where they belong.
Please Note:
- The pictures shown are a representation of the item, colour may vary slightly due to the colour setting of each individual monitor. Please double check the size and colour before purchasing.
Additional information
| Weight | 0.5 kg |
|---|---|
| Bottle Size | 500gms |
| Bottle Size mls | 0.4345L |
| Operating wavelength | 405nm |
| Printer Type | LCD |
| Resin Brand | eSUN |
| Resin Colour | Pink |
| Resin Type | High Temp |
Be the first to review “eSUN High Temp Resin Pink 500gms”
You must be logged in to post a review.
Reviews
There are no reviews yet.