fiberlogy Impact PLA Red 1.75mm 850gms Spool 3D printing filament
£22.95 £27.54 inc. VAT £20.66 £24.79 inc. VAT
IMPACT PLA is a technical filament with increased impact strength. Its parameters exceeding even the ABS. While keeping the ease and security of the printing process typical of traditional PLA, IMPACT PLA is ideal for creating demanding prints working in extreme conditions while maintaining the highest level of attention to detail.
Want to be notified when this product is back in stock?
- Description
- What is PLA?
- Additional information
- Reviews (0)
Description
IMPACT PLA is a technical filament with increased impact strength. Its parameters exceeding even the ABS. While keeping the ease and security of the printing process typical of traditional PLA, IMPACT PLA is ideal for creating demanding prints working in extreme conditions while maintaining the highest level of attention to detail.
Net weight : 0.85 kg
Printing temperature: 220- 240?C
Bed temperature: 50- 70?C (when using plates or other means to increase the adhesion, the heating of the bed is not required)
Diameter tolerance: +/- 0.02 mm
Oval tolerance: + 0.01 mm
PLA
Overview
PLA is easy to print, at low cost. Non-toxic and Eco friendly. A perfect starting point for people new to 3D printing.
PLA is created from all-natural renewable resources, and under the correct conditions, is fully biodegradable. This material is typically used for prototypes or decorative prints; Due to the low temperatures and ease of use, features tend to print sharper and more detailed. Its non-toxic nature means that it can be printed for food and medical applications if done so from a sterile and sanitized environment.
However, PLA prints are prone to snapping and breaking under pressure, and become damaged and discolored from high temperatures and prolonged exposure to sunlight or water.
Used for: Design prototypes, Plastic Cups, Medical Implants, Food containers.
Printability
Very Easy
Pros
- Low Cost
- Easy to Print
- Eco Friendly
- Does Not Warp
Cons
- Less robust than other materials
- Vulnerable to Water and sunlight
Recommended Settings
Print Temp
180°C -210°C
Cooling Fan on
Temp may vary on brand
Bed Temp
Temp may vary on brand
Print Surface
No Heated Bed Required
No Enclosure Required
Example Prints
Additional information
| Weight | 0.85 kg |
|---|---|
| Dimensions | 210 × 210 × 90 mm |
| Filament Colour | Red |
| Filament Diameter | 1.75mm |
| Filament Type | PLA |
| Filament Weight | 850gms |
| Filament Range | Fiberlogy Impact PLA |
| Filament Brand | fiberlogy |
| Filament Properties | High Impact Strength, High Strength |
Reviews
There are no reviews yet.