fiberlogy PET-G Graphite coloured 1.75mm 850gms Spool 3D printing filament

fiberlogy PET-G Graphite coloured 1.75mm 850gms Spool 3D printing filament

Original price was: £28.80.Current price is: £14.40. £12.00 ex. VAT

Out of stock

Original price was: £28.80.Current price is: £14.40. £12.00 ex. VAT

A great quality 3D Printing PETG at a very affordable price.

Availability: Out of stock SKU: 5902560992618

Want to be notified when this product is back in stock?


An introduction to working with PETT/S or PET-G by the very knowledgeable Thomas Sanladerer.  A must watch if you are new to 3D printing with good quality PET-G from any reputable manufacturer.  Please note up until you have the correct settings dialled in to your 3D printer, PETG can take a little while getting used to, but the benefits of printing with PET-G are worth it.

Please note, postage within the UK is included in the price you see.

Fiberlogy PET-G 3D printing filament has properties such as;

  • high durability
  • low shrinkage
  • resistance to acids, salts, alkalic substances

Application suggestions, but not limited to;

  • END-USE PARTS: containers, holders
  • PROTOTYPES: bottles, packaging
  • ELECTRONICS: covers, cases, products containing diodes
  • DECORATIONS: lamps, glass-resembling elements
  • JEWELLERY: rings, necklaces, bracelets

The filament will arrive in a vacuum pack, with silica gel and boxed individually.

  • Diameter: 1,75 mm
  • Net weight: 0,85 kg
  • Printing temperature: 230°C – 250°C
  • Bed Temp: 90°C
  • Diameter tolerance: +/- 0,02 mm
  • Avg Roundness: + 0,01 mm



A versatile middle ground between PLA and ABS.

PET-G Is stronger than PLA but easier to print with than ABS. The glycol in this material makes the filament less brittle and resistant to water, chemicals, and solvents. It is naturally clear, making it the go-to filament for translucent prints. 
The strength and durability of a PET-G filament vary depending on the brand. An easy way to check if one PET-G is stronger than another is by comparing the tensile strength value of each filament. If printed in a sterile, FDA-approved environment, PET-G can be used to create food-safe prints.

Due to its strong and durable nature, PET-G can be difficult to finish with post-processing methods such as sanding. Prints may also be difficult to paint or glue together. Depending on printer and slicer settings, you may experience small hairs over the surface of prints caused by stringing. These can be removed with a heat gun or lighter.

Used for: Water Bottles, Plant Pots.









Recommended Settings

Print Temp

220°C -250°C

Cooling Fan On

Temp may vary on brand

Bed Temp

60°C – 80°C

Temp may vary on brand

Print Surface

No Heated Bed Required
No Enclosure Required

Example Prints

Additional information

Weight0.85 kg
Dimensions210 × 210 × 90 mm
Filament Brand


Filament Colour


Filament Diameter


Filament Spool


Filament Type


Filament Weight


Filament Range

Fiberlogy PETG


There are no reviews yet.

Be the first to review “fiberlogy PET-G Graphite coloured 1.75mm 850gms Spool 3D printing filament”