![fiberlogy-refill-pet-g-1.75mm-translucent-green-3d-printing-filament-850gms-[2]-14719-p](https://3dfilaprint.com/wp-content/uploads/2021/10/fiberlogy-refill-pet-g-1.75mm-translucent-green-3d-printing-filament-850gms-2-14719-p-150x150.png)
fiberlogy Refill Easy PET-G 1.75mm Translucent Green 3D printing filament 850gms
£17.95 £21.54 inc. VAT
A great quality 3D Printing PETG refill coil at a superb price.
- Description
- What is PET-G?
- Additional information
- Reviews (0)
Description
An introduction to working with PETT/S or PET-G by the very knowledgeable Thomas Sanladerer. A must watch if you are new to 3D printing with good quality PET-G from any reputable manufacturer. Please note up until you have the correct settings dialled in to your 3D printer, PETG can take a little while getting used to, but the benefits of printing with PET-G are worth it.
An introduction to working with PETT/S or PET-G by the very knowledgeable Thomas Sanladerer. A must watch if you are new to 3D printing with good quality PET-G from any reputable manufacturer. Please note up until you have the correct settings dialled in to your 3D printer, PETG can take a little while getting used to, but the benefits of printing with PET-G are worth it.
Please note, postage within the UK is included in the price you see. We are offering this fiberlogy Vertigo coloured PET-G refill option for those who are comfortable to purchase filament without it first being pre-wound on a fixed spool. Though just because it is not wound on a fixed spool does not make it an inferior product, it does allow us to offer it cheaper than its fixed spool counterpart and feels better on the mind for reducing the amount of 3D printing filament spools that (may) end up just being thrown away. Fiberlogy PET-G 3D printing filament has properties such as;
- high durability
- low shrinkage
- resistance to acids, salts, alkalic substances
Application suggestions, but not limited to;
- END-USE PARTS: containers, holders
- PROTOTYPES: bottles, packaging
- ELECTRONICS: covers, cases, products containing diodes
- DECORATIONS: lamps, glass-resembling elements
- JEWELLERY: rings, necklaces, bracelets
For those of you who are unfamiliar with the filament refill option, there is no better way to enlighten you than to point you in the direction of the creator of the “Masterspool” Richard Horne AKA Richrap. It is also a worthwhile watch if you have any reservations regarding the tangling of filaments.
There are several options for you in terms of spool creation, ready to use with your fiberlogy filament refill coil. You have the original V4 Masterspool by Richard Horne – https://www.thingiverse.com/thing:2769823 Or the specifically made spool for this 850gms fiberlogy refill pack – https://www.thingiverse.com/thing:3097489 More Information on the fiberlogy PET-G refill pack. The filament will arrive in a vacuum pack, with silica gel and boxed individually.
- Diameter: 1,75 mm
- Net weight: 0,85 kg
- Printing temperature: 230°C – 250°C
- Bed Temp: 90°C
- Diameter tolerance: +/- 0,02 mm
- Avg Roundness: + 0,01 mm
PET-G
Overview
A versatile middle ground between PLA and ABS.
PET-G Is stronger than PLA but easier to print with than ABS. The glycol in this material makes the filament less brittle and resistant to water, chemicals, and solvents. It is naturally clear, making it the go-to filament for translucent prints.
The strength and durability of a PET-G filament vary depending on the brand. An easy way to check if one PET-G is stronger than another is by comparing the tensile strength value of each filament. If printed in a sterile, FDA-approved environment, PET-G can be used to create food-safe prints.
Due to its strong and durable nature, PET-G can be difficult to finish with post-processing methods such as sanding. Prints may also be difficult to paint or glue together. Depending on printer and slicer settings, you may experience small hairs over the surface of prints caused by stringing. These can be removed with a heat gun or lighter.
Used for: Water Bottles, Plant Pots.
Printability
Medium
Pros
-
Water Resistant -
Naturally Translucent -
Decent Strength and Durability
Cons
-
Printer Tuning Required -
Difficult to Post-Process -
Stringing can Occur
Recommended Settings
Print Temp
Cooling Fan On
Temp may vary on brand
Bed Temp
Temp may vary on brand
Print Surface
No Heated Bed Required
No Enclosure Required
Example Prints
Additional information
| Weight | 0.85 kg |
|---|---|
| Filament Brand | fiberlogy |
| Filament Colour | Green |
| Filament Diameter | 1.75mm |
| Filament Type | PETG |
| Filament Weight | 850gms |
| Filament Weight | 850gms |
| Filament Range | Fiberlogy Easy PETG |
Be the first to review “fiberlogy Refill Easy PET-G 1.75mm Translucent Green 3D printing filament 850gms”
You may also like…
Modified 3D Pro
£55.96 £67.15 inc. VAT3DLAC 3D Printer Platform Adhesion Spray
£7.86 £9.43 inc. VATThe PolyBox Edition 2 by Polymaker
£56.00 £67.20 inc. VATLokBuild 3D Print Surface
£8.51 – £34.25
Reviews
There are no reviews yet.