![filaprint-leaf-green-premium-pla-1.75mm-sample-[2]-9950-p](https://3dfilaprint.com/wp-content/uploads/2021/11/filaprint-leaf-green-premium-pla-1.75mm-sample-2-9950-p-150x150.jpg)
FilaPrint Leaf Green Premium PLA 1.75mm Sample
£2.50 £3.00 inc. VAT
An easy to print 10 Metre sample of FilaPrint Premium PLA, extremely low warp (if at all) slightly modified PLA to give your prints extra strength and durability!
- Description
- Additional information
- Reviews (0)
Description
Leaf Green Premium PLA! Low warp, easy to print.
This 10 Metre sample is delivered to you in a clear, resealable bag with a sachet of silica gel.
Fantastic layer bonding, low temperature printing, (see 3D Benchy print sample in photo) no heated platform neccessary, lays down beautifully on most 3D printer platforms, tapes etc.
Superb tolerances with a smooth finish, a perfect compliment to your 3D printer.
Features:
- Tougher and less brittle compared to regular PLA
- Easy to print at low temperature
- Little “warping”
- biodegradable
- Limited odor
| Diameter | Tolerance | Roundness |
|---|---|---|
| 1.75mm | ± 0,05mm | >95% |
| Characteristics | Test Method | Typical Value |
| Specific Gravity | ASTM D1505 | 1,24 g/cc |
| MFI | 6,0 g/10 min | |
| Tensile Strength | ASTM D882 | 110 MPa (MD) 145 MPa (TD) |
| Elongation at break | ASTM D882 | 160 MPa (MD) 100 MPa (TD) |
| Tensile Modulus | ASTM D882 | 3310 MPa (MD) 3860 MPa (TD) |
| Impact Strength | 7,5 KJ/m? | |
| Printing Characteristics | Test Method | Typical Value |
| Printing temperature | 180-210°c | |
| Melting temperature | 210±10°c | |
| Melting point | ASTM D3418 | 145-160°c |
Looking for a new type of printing surface, why not try the amazing PrintBite.
Additional information
| Weight | 0.035 kg |
|---|---|
| Filament Brand | 3D FilaPrint |
| Filament Colour | Green |
| Filament Diameter | 1.75mm |
| Filament Length | 10 Metres |
| Filament Type | PLA |
Reviews
There are no reviews yet.