Fillamentum PETG Essential Black 1.75mm 3D Printer Filament 1KG

Fillamentum PETG Essential Black 1.75mm 3D Printer Filament 1KG

£42.00 £35.00 ex. VAT

Out of stock

£42.00 £35.00 ex. VAT

Filament made of polyethylene terephthalate glycol (PETG) is widely used for 3D printing thanks to its specific properties and easy processing.

Availability: Out of stock SKU: 56599

Want to be notified when this product is back in stock?

Description

Filament made of polyethylene terephthalate glycol (PETG) is widely used for 3D printing thanks to its specific properties and easy processing. PETG is an ideal material for prints with practical applications.

Features:

  • Low warping and shrinkage
  • Great layer adhesion
  • High strength & good hardness
  • Flexural resistance
  • Temperature resistance up to 70 °C
  • Low fumes released
  • Chemical resistance against water, acids, alkalis, and alcohols
  • Transparency and gloss
  • Safe for food contact applications according to EU regulation
  • Safe for food contact applications according to U.S. FDA regulation (all the color versions comply except “Black” and “Yellow”)
  • Safe to use in electrical and electronic equipment
  • Recyclable & BPA-free & styrene-free
  • For a good adhesion use PVA glue or 3DLac. Due to a great adhesion to other materials, it can damage your bed without a separation layer of adhesive
Working temperature:235–255 °C
Heated bed:65–75 °C
Diameter:1.75 mm
Diameter tolerance:+/- 0.05 mm
Weight:
1 kg of filament (+ 250 g spool)
The length of the filament:
325 m (1.75 mm, 1 kg)

To dry the PETG filament dry at 65c for  4 Hours.

Comparison of the Fillamentum copolyester filaments:

CPE CF112 CarbonCPE HG100 PETG 
Impact resistance106 kJ/m2
(unnotched)
no break
(notched)
85 J/m
(notched)
Tensile strength52 MPa48 MPa50 MPa
Elongation at break8 %150 %120 %
Hardness 94 R-Scale115 R-Scale105 R-Scale
Flexural strength/71 MPa71 MPa
Flexural modulus/1860 MPa2150 MPa
Wear resistance★★★★★★
Creep resistance★★★★★★
Heat resistance (HDT)up to 100 °C80 °C70 °C
Chemical resistance to acids, bases,
hydrocarbons
goodgoodpoor

 

 

 

 

   

PETG

PET-G

Overview

A versatile middle ground between PLA and ABS.

PET-G Is stronger than PLA but easier to print with than ABS. The glycol in this material makes the filament less brittle and resistant to water, chemicals, and solvents. It is naturally clear, making it the go-to filament for translucent prints. 
The strength and durability of a PET-G filament vary depending on the brand. An easy way to check if one PET-G is stronger than another is by comparing the tensile strength value of each filament. If printed in a sterile, FDA-approved environment, PET-G can be used to create food-safe prints.

Due to its strong and durable nature, PET-G can be difficult to finish with post-processing methods such as sanding. Prints may also be difficult to paint or glue together. Depending on printer and slicer settings, you may experience small hairs over the surface of prints caused by stringing. These can be removed with a heat gun or lighter.

Used for: Water Bottles, Plant Pots.

Strength

Medium-High

Durability

Medium-High

Printability

Medium

Pros

Cons

Recommended Settings

Print Temp

220°C -250°C

Cooling Fan On

Temp may vary on brand

Bed Temp

60°C – 80°C

Temp may vary on brand

Print Surface

No Heated Bed Required
No Enclosure Required

Example Prints

Additional information

Weight1 kg
Filament Brand

Fillamentum

Filament Colour

Black

Filament Diameter

1.75mm

Filament Type

PETG

Filament Weight

1Kg

Filament Range

Fillamentum PETG Essential

Reviews

There are no reviews yet.


Be the first to review “Fillamentum PETG Essential Black 1.75mm 3D Printer Filament 1KG”