Flashforge Inventor 2 3D Desktop Printer perfect for education

Flashforge Inventor 2 3D Desktop Printer perfect for education

£571.20 £476.00 ex. VAT

Out of stock

£571.20 £476.00 ex. VAT

The Flashforge Inventor II 3D printer is an education exclusive model bundled with award-winning 3D printing curriculum and 12 months warranty. In addition to all the specs that its predecessor boasts, the Inventor II is now equipped with a built-in HD camera, air filtration system and several other unique features, perfect for a STEAM learning environment.

Availability: Out of stock SKU: 38419

Want to be notified when this product is back in stock?


The Flashforge Inventor II  3D printer is an education exclusive model bundled with award-winning 3D printing curriculum and 12 months warranty.

In addition to all the specs that its predecessor, the Inventor 2 boasts, the Inventor II is now equipped with a built-in HD camera for users to watch the printing process remotely. The magnetic flexible bed sheet provides great printing support and also allows effortless removal of the completed prints, plus an air filter system very well suitable for STEAM based learning.

Other main features include an intelligent door sensor which automatically stops the print when the 3D printer doors are opened and closed; at just 50dB, it is also one of the quietest 3D printers available, making it ideally suitable for the classroom environment.

FlashForge Inventor IIs Bullet Points:

  • Fully assembled. No setup.
  • Intelligent assisted levelling system. More precise and easier calibration.
  • 3.5-inch touchscreen panel. Just four taps to start printing.
  • Filament-run-out detection. Always successful output.
  • WiFi Connection. Wirelessly control your printer.
  • Intelligent door sensor allows you to pause a print when the door is opened and resumes printing after closing the door.
  • Slide build plate. Easier 3D print removal.
  • Sleek and contained design. No heated plate. Safer to use.
  • Noise level as low as 50dB. Quiet to use.
  • Air filtration instalment helps to filter tiny particles, giving you a safer 3D printing environment.

Key Specifications:

  • Printing Technology: FFF (Fused Filament Fabrication)
  • Build Volume: 150 L X 140 W X 140 H mm; 5.9 X 5.5 X 5.5 in
  • Layer Resolution: 50~400 microns
  • Positioning Precision: XY: 11 microns [0.0004 in]; Z: 2.5 microns [0.0001 in]
  • Extruder Quantity: One

Mechanical & Dimensions

  • Extruder Quantity: Single
  • Frame & Body: Plastic Alloy
  • Printer Dimensions (without Lid): 420 x 420 x 420 mm, (17 x 17 x 17 in)

Software & Firmware:

  • FlashPrint/Slic3r/Cura (set up before use)
  • Connectivity: USB Cable/USB Stick/Wi-Fi
  • File Type: Input: .stl, .obj, .3mf, ffp; Output: .g/gx
  • Language Interface: English/Chinese/German/French/Italian/Czech/Japanese
  • Supports (OS): Windows XP/Vista/7/8/10, Mac OS X, Linux

Software Download Centre

Warranty / After-Sales Policy

In order to improve users’ satisfaction, trust, and create better sales performance, Flashforge specially standardizes after-sales service and clarifies the following after-sales service regulations:

Flashforge FFF technology 3D printer provides you with a 12-month limited warranty for the 3d printer and a 3-month warranty for the FFF technology 3D printer nozzle component. The warranty period starts from the manufacture date. The effective date of the warranty is subject to the background purchasing time on the official website.

Ⅰ、Flashforge will provide free replacement parts if the equipment is damaged due to product quality problems during the warranty period. You shall submit the application for Flashforge After-sales Service to enquiries@3dfilaprint.com, and Flashforge will deliver the maintenance parts within the warranty period according to the application contents. If you cannot provide a complete application, which would make it impossible to verify the equipment information, and you have to bear the cost of replacement parts.

Ⅱ、The warranty time for repair parts is the same as that of the whole machine. The warranty service is still available after the equipment maintenance during the warranty period.

Ⅲ、3DFilaprint and Flashforge provide users with lifelong, free technical guidance and consulting services. Problems you cannot solve can be solved with Flashforge engineers’ remote guidance.

Ⅳ、The following parts are not covered by the warranty: Platform Sticker, Platform Metal Plate, Platform Glass Plate, Acrylic Cover, SD Card, USB Stick, USB Cable, Filament, Filament Shaft, Build Platform, Plastic Scraper, Metal Scraper, Gloves, Allen Wrench, (2.5mm*1/3mm*1/5mm*1), Open-end Wrench, Toolkit and tools inside.

Ⅴ、 The following situations are not covered by the warranty:

1. Unable to provide valid warranty card or serial number (lost, altered, blurred or not identifiable);

2. The warranty period of the whole equipment and parts has expired;

3. The total running time of FFF commercial equipment exceeds 1000 hours, and the total running time of FFF consumer equipment exceeds 400 hours;

4. The equipment has been repaired in a repair shop without Flashforge’s authorization;

5. Equipment failure or damage caused by unauthorized modification of the equipment;

6. Equipment failure or damage caused by incorrect installation or use;

7. Equipment failure or damage caused by the use of the equipment in a non-product specified working environment;

8. Equipment failure or damage due to misuse (including overloading) or abuse;

9. Equipment failure or damage caused by using other brand’s parts;

10. Equipment failure or damage caused by using low-quality filaments (it is recommended to use Flashforge’s official filaments);

11. Equipment failure or damage caused by the use of non-Flashforge specified software;

12. Equipment failure or damage caused by improper maintenance (dampness, mildew or exposure to extreme weather);

13. Normal wear and tear, ageing of equipment or appearance scratches or defects caused by operation;

14. Failure or damage caused by irresistible factors such as fire, earthquake, lightning, flood, etc.

Ⅵ、Flashforge provides you with technical support:

Flashforge is solely responsible for quality problems within the warranty period, and engineers will be arranged to contact you directly;
You are obliged to make basic judgment on the occurrence of failure and provide materials for Flashforge’s reference. Conventional technical problems shall be solved by Flashforge engineers with remote assistance, and special technical problems shall be solved by after-sales technical department of Flashforge through consultation with you.
Any dispute arising from the execution of this agreement and its attachment shall be settled by the parties through negotiation on the basis of mutual benefit.

The description list of Flashforge FFF technology 3D printer product types

Product TypeConsumer Grade
English NameCreator ProDreamerDreamer NXFinderAdventure3
Product TypeCommercial Grade
English NameGuider IIsGuider IIInventorInventor IICreator 3 / pro

The above terms apply to the users purchased from Flashforge dealers, please contact your local distributor. If you intend to purchase non-FFF equipment, please contact the Flashforge after-sales consultation.

If there are any issues with the product please feel free to call us on 01702 611 027 or email us at enquiries@3dfilaprint.com;  Email us with your Order ID and Pictures or Video.

Additional information

Weight15.6 kg
Data Input

stl – .obj – .3mf – .ffp –


Single Extruder

Extruder Diameter


Filament Type

PLA 1.75mm –

Fully Enclosed

Yes – with Air filtration fitted

Heated Platform


Printing size



There are no reviews yet.

Be the first to review “Flashforge Inventor 2 3D Desktop Printer perfect for education”