Haydale SynerG 3D Conductive PLA Filament 1.75mm 1KG

Description

SynerG Conductive PLA 3D Printing Filament
Haydale’s SynerG nanomaterial enhanced polylactic acid (PLA) filaments for 3D printing are improving
the speed, strength, print quality and accuracy of 3D printed parts.
• Electrically conductive
• 50% increase in Young’s modulus
• 30% increase in the strength of the filament
• 3x increase in thermal conductivity
• High quality print and excellent first layer adhesion and z-axis bonding

What are they used for?

The mechanical, electrical, and thermal properties of the nanomaterial-enhanced PLA filaments can be tailored to meet the needs of different applications and markets, including:

· Rapid prototyping of more durable components, that are higher performance and more cost effective than standard PLA filaments.

· Radio Frequency Identification (RFID). This unique capacitive coding technology links printed media to a smart device with the advantages of anti-counterfeiting and document security and can be applied to curved surfaces and foil packaging.

· Pressure Sensors. Flexible, printable, graphene-based sensor systems that can measure and collect high quality impact and pressure data.

· Biomedical Devices. Used to print test strips in the self-diagnostic biomedical sensor device market for diabetes monitoring.

· 3D Printed Circuits. Uses to create touch sensors to turn on/off light switches, and automatic door openers using a hand in front of the sensor.

Benefits

· Excellent first layer adhesion and z-axis strength retention

· Major increase in speed of processing

· Improved strength and stiffness

· Better impact performance

· Excellent print quality and surface finish

· Improved dimensional accuracy

· Compatibility with a broad range of printers and ease of use

Processing Guidance
• SynerG Conductive PLA 3D printing filament can be processed on all FDM/FFF type 3D printers.
• SynerG Conductive PLA 3D printing filament should typically be extruded using a nozzle
temperature of 210°C and a heated bed temperature of 60°C is recommended for good first layer
adhesion in 3D printing.
• SynerG Conductive PLA 3D printing filament should be printed at a maximum of 50mm/sec using
a 0.4mm brass or tungsten carbide nozzle (tungsten carbide recommended) with a retraction
distance of 14mm and speed of 8mm/sec.
• SynerG Conductive PLA 3D printing filament should not be left hot in the nozzle when not printing
and should be removed immediately after printing using a forward purge followed by retraction.
• 3D printers, especially their nozzles, should always be maintained, and should be cleaned before
and after use in line with the printer manufacturer’s instructions.
Storage
PLA is a biodegradable thermoplastic polyester and will absorb moisture over time which can affect
product performance. To ensure a good shelf life before use the 3D printing filament is packaged under
a controlled vacuum and sealed to prevent moisture ingress. It is recommended that filament be kept
in cool and dry conditions before use.
Health, Safety and Environmental
Please refer to the Safety Datasheet for the product before use.

       

Additional information