High Temp Carbon Fibre PLA Black V2.0 1.75mm

High Temp Carbon Fibre PLA Black V2.0 1.75mm

£45.60 £38.00 ex. VAT

In stock

£45.60 £38.00 ex. VAT

A material consisting of thin, strong crystalline filaments of carbon, mixed with high quality PLA resins, giving you a tough, strong, heat resistant filament.

Availability: In stock SKU: 640970861982

Description


High Performance, Easy Printing…It’s World’s Best CF!

Proto-pasta’s High Performance Carbon Fibre HTPLA-CF combines engineering-grade performance with the ease and environmental-friendliness of PLA printing.  Since kickstarting the World’s First 3D Printable Carbon Fibre PLA and our original HTPLA, we’ve wanted to combine the two for a “super-material“.  Why is this material “the best”?
Compared to ABS, PET, and similar Polyester materials, HTPLA-CF has:

  • Easier and more reliable printing
    • No heated bed required
    • Lower processing temperatures, like standard PLA
    • Less warping and distortion when processing
  • More temperature resistance* for maintaining properties to higher temperatures
    • Most ABS, PET, and Polyesters get soft at 80C +/- 10C
    • HTPLA-CF maintains properties up to 120C or more (*when heat treated)
  • Higher strength and better strength-to-weight ratio for stronger parts with less material 
  • Improved surface hardness for less wear in abrasive environments
  • Less shrinkage and distortion for more accurate parts
  • Higher stiffness so parts hold their shape
  • Renewable biopolymer with low odor
  • Highly desirable black finish 

Compared to the Original Carbon Fibre PLA, HTPLA-CF has:

  • Improved toughness for less breaking when handling and easier processing
  • Higher HDT when heat treated for maintaining properties to higher temperatures.

Compared to HTPLA, HTPLA-CF has:

  • Improved surface hardness for less wear in abrasive environments
  • Less shrinkage and distortion for more accurate parts

HTPLA-CF prints easily and can be heat treated for higher temperature performance with a potential Heat Deflection Temperature (HDT) in excess of 140C (285F) depending on processing. We had good results when heat treating in an oven at 110C (225F) for an hour. We recommend leaving the supports on your parts, placing them on a non-radiating surface (like glass, ceramic, or composite), and letting them cool in the oven to minimize distortion. Parts must be baked above 60C for any crystallization to occur.

  • Available in 1.75 & 2.85 (3) mm diameter
  • 500g 8″ diameter spool only

Carbon Fibre is somewhat abrasive, so consider upgrading to a wear resistant nozzle for less regular maintenance.

In our experience, good results were achieved using standard PLA parameters and standard build surface preparation (blue tape or glue stick). No heated bed required.
Also tested on our amaxing new surface material PrintBite.

       

Check out Proto-pasta’s blog here and some handy how-to guides here

PLA

Overview

PLA is easy to print, at low cost. Non-toxic and Eco friendly. A perfect starting point for people new to 3D printing.

PLA is created from all-natural renewable resources, and under the correct conditions, is fully biodegradable. This material is typically used for prototypes or decorative prints; Due to the low temperatures and ease of use, features tend to print sharper and more detailed. Its non-toxic nature means that it can be printed for food and medical applications if done so from a sterile and sanitized environment. 
However, PLA prints are prone to snapping and breaking under pressure, and become damaged and discolored from high temperatures and prolonged exposure to sunlight or water. 

Used for: Design prototypes, Plastic Cups, Medical Implants, Food containers.

Strength

Medium

Durability

Low

Printability

Very Easy

Pros

Cons

Recommended Settings

Print Temp

180°C -210°C

Cooling Fan on

Temp may vary on brand

Bed Temp

0°C – 45°C

Temp may vary on brand

Print Surface

No Heated Bed Required
No Enclosure Required

Example Prints

Additional information

Weight0.5 kg
Dimensions200 × 200 × 55 mm
Filament Brand

proto-pasta

Filament Colour

Black

Filament Diameter

1.75mm

Filament Type

PLA

Filament Weight

500gms

Filament Weight

500gms

Filament Range

Proto-pasta HTPLA

Filament Properties

High Strength

1 review for High Temp Carbon Fibre PLA Black V2.0 1.75mm

  1. 5 out of 5

    David Brookes

    High Temp CF

    After the usual brief tuning test prints to confirm the temperature settings, the adhesion is first class and the surface finish is superb, prints beautifully!


Add a review