iglidur A350-PF 3D Printing Filament 1.75mm 750gms

iglidur A350-PF 3D Printing Filament 1.75mm 750gms

£347.99 £289.99 ex. VAT

In stock

£347.99 £289.99 ex. VAT

 (Avail 4 working days) Food-compliant and heat-resistant – print individual components yourself or have them printed with our 3D printing service.

SKU: 56891

Description

*This item is dropped shipped and usually dispatched within 4 working days.

3D printer filament: iglidur™ A350-PF

  • Compliant with Regulation (EU) No. 10/2011 and FDA guidelines
  • In industry-standard blue
  • Complies with the fire prevention requirements of the Federal Aviation Administration of the USA (FAA) for aircraft interiors
  • Suitable for autoclave
  • High-temperature printer with 180°C build chamber temperature necessary

Food-safe high-temperature filament, FDA-compliant

iglidur A350-PF is an abrasion-resistant, high-temperature filament developed for the food and packaging industry. As such, the raw material is compliant with EU 10/2011 and FDA food contact regulations and has the industry standard blue colour. It is temperature-resistant up to 180°C, fire-retardant according to UL94-V0 and can be sterilised with superheated steam. Due to its high processing temperature of 340-360°C and a compulsory installation temperature of min. 160°C, a high-temperature 3D printer is required for processing. The filament is very sensitive to moisture and should be stored in a drying container and actively dried regularly. iglidur A350 is available as injection moulded, bar stock and 3D printing material.

When to use it?

  • For applications in the food industry with high application temperatures of up to 180°C
  • From prototype to volume production: iglidur A350 is available as 3D printing filament, from Bar stock and in injection moulding

When not to use it?

  • When high wear resistance at high-temperature loads is required
  • If, in addition to high application temperatures, high strength is also required or complex parts are to be produced (→ iglidur RW370-PF)
  • If your existing 3D printer does not have a build chamber heater (→ iglidur i151-PF)
Dimensions
filament diameter1.75 mm
Outer diameter spool200 mm
Inner diameter spool52 mm
Spool width55 mm
General properties
Colorblue
Material suitable forExpert
Max. moisture absorption (at 23 °C/73 °F, 50% r.h.)0.6 Wt.-%, test method DIN 53495
Max. water absorption1.9 Wt.-%
Net weight750 g
Flexural strength50 / 46 MPa Printed flat/upright
Density1.42 g/cm3
Physical and thermal properties
Max. long-term application temperature180 °C
Max. short-term application temperature210 °C
Lower application temperature-100 °C
Max. recommended surface pressure (at +20 °C/68 °F)35.0 MPa
Requirements
Mould-free according to DIN EN ISA 846 Procedure ANo
Suitable for glue stickNo
Electrical properties
Surface resistance> 1010 Ω, test method DIN 53482
Specific volume resistance> 1011 Ωcm, test method DIN IEC 93
Mechanical properties
Shore-D Hardness76, test method DIN 53505
Modulus of elasticity1,250 / 1,390 MPa, test method DIN 53457
Processing instructions
Nozzle temperature (min.)340 °C
Nozzle temperature (max.)350 °C
Bed temperature (min.)180 °C
Bed temperature (max.)200 °C
Construction spaceClosed installation space is necessary
     
        

Additional information

Weight0.75 kg
Filament Brand

iglidur™

Filament Colour

Blue, Natural

Filament Diameter

1.75mm

Filament Weight

750gms

Shipping Notes

Ready for shipping in 2-3 working days

Filament Weight

750gms

Filament Type

iglidur

Reviews

There are no reviews yet.


Be the first to review “iglidur A350-PF 3D Printing Filament 1.75mm 750gms”