iglidur I150-PF 3D Printing Filament 1.75mm 750gms

iglidur I150-PF 3D Printing Filament 1.75mm 750gms

£93.59 £77.99 ex. VAT

In stock

£93.59 £77.99 ex. VAT

(Avail 4 working days) High quality food compliant 3D printing filament from Igus.

SKU: 34187


*This item is dropped shipped and usually dispatched within 4 working days.

3D printer filament: iglidur™ |150-PF

Components made of igus™ Tribo-Filament are up to 50 times more wear-resistant than standard materials for 3D printing and therefore have an extremely long service life. Due to their excellent tribological
properties, they are suited for 3D printing of replacement parts, for example bearings, drive nuts, gears and other wear parts. The igus™ Tribo-Filaments can be processed on 3D printers that are based on the fused-deposition-modelling method (FDM/FFF) and that allow the nozzle temperature to be set as required.

Typical application areas:

  • Special machine construction
  • Jig construction
  • Complex wear parts

Tribological 3D Printing Filament
Tribology is the science and engineering of interacting surfaces in relative motion. It includes the study and application of the principles of friction, lubrication and wear.  Tribology is particularly important in today’s world because so much energy is lost to friction in mechanical components. To use less energy, we need to minimize the amount that is wasted. Significant energy is lost due to friction in sliding interfaces.

  • Food compliant
  • tribo-filament that is easiest to process
  • High abrasion resistance at low surface speeds
  • Good mechanical coefficients
  • Cost-effective
  • Compliant with EU Regulation 10/2011

Flexural strength: 54 MPa

You can print on a warm printer platform around 50c, using the wonderful 3DLac platform adhesive.

For a comprehensive overview of the Tribology filament specifications and tests view here.

General Properties



Material suitable for


Max. moisture absorption (at 23 °c/73 ∞F, 50% r.h.)

0.3 Wt.-%, test method DIN 53495

Max. water absorption

0.7 Wt.-%

Net weight

250 g

Flexural strength

54 MPa

Physical and thermal properties

Max. long-term application temperature

65 °c

Max. short-term application temperature

75 °c

Lower application temperature

-30 °c

Max. recommended surface pressure (at +20 °c/68 ∞F)

24 MPa


Mould-free according to DIN EN ISA 846 Procedure A


Processing instructions

Nozzle temperature (min.)

240 °c

Nozzle temperature (max.)

250 °c

Bed temperature (min.)

20 °c

Bed temperature (max.)

60 °c

Recommended adhesion

igus™ adhesive film or glue stick on glass (Adhesive film imperative with non-heated pressure bed)

Construction space

No closed installation space necessary

Component cooling

A component cooling is not necessary, with cooling switched on it is also possible to print


Additional information

Weight0.75 kg
Filament Brand


Filament Colour


Filament Diameter


Filament Weight


Shipping Notes

Ready for shipping in 2-3 working days

Filament Weight


Filament Type



There are no reviews yet.

Be the first to review “iglidur I150-PF 3D Printing Filament 1.75mm 750gms”