iglidur I150-PF 3D Printing Filament 2.85mm 750gms
£79.99 £95.99 inc. VAT £71.99 £86.39 inc. VAT
(Avail 4 working days) High quality food compliant 3D printing filament from Igus. Low friction. High strength.
- Description
- Additional information
- Reviews (0)
Description
*This item is dropped shipped and usually dispatched within 12 working days.
3D printer filament: iglidur™ |150-PF
Components made of igus™ Tribo-Filament are up to 50 times more wear-resistant than standard materials for 3D printing and therefore have an extremely long service life. Due to their excellent tribological
properties, they are suited for 3D printing of replacement parts, for example bearings, drive nuts, gears and other wear parts. The igus™ Tribo-Filaments can be processed on 3D printers that are based on the fused-deposition-modelling method (FDM/FFF) and that allow the nozzle temperature to be set as required.
Typical application areas:
- Special machine construction
- Jig construction
- Complex wear parts
Tribological 3D Printing Filament
Tribology is the science and engineering of interacting surfaces in relative motion. It includes the study and application of the principles of friction, lubrication and wear. Tribology is particularly important in today’s world because so much energy is lost to friction in mechanical components. To use less energy, we need to minimize the amount that is wasted. Significant energy is lost due to friction in sliding interfaces.
- Food compliant
- tribo-filament that is easiest to process
- High abrasion resistance at low surface speeds
- Good mechanical coefficients
- Cost-effective
- Compliant with EU Regulation 10/2011
Flexural strength: 54 MPa
You can print on a warm printer platform around 50c, using the wonderful 3DLac platform adhesive.
For a comprehensive overview of the Tribology filament specifications and tests view here.
General Properties
Colour | White |
Material suitable for | Beginner |
Max. moisture absorption (at 23 °c/73 ∞F, 50% r.h.) | 0.3 Wt.-%, test method DIN 53495 |
Max. water absorption | 0.7 Wt.-% |
Net weight | 250 g |
Flexural strength | 54 MPa |
Physical and thermal properties
Max. long-term application temperature | 65 °c |
Max. short-term application temperature | 75 °c |
Lower application temperature | -30 °c |
Max. recommended surface pressure (at +20 °c/68 ∞F) | 24 MPa |
Requirements
Mould-free according to DIN EN ISA 846 Procedure A | No |
Processing instructions
Nozzle temperature (min.) | 240 °c |
Nozzle temperature (max.) | 250 °c |
Bed temperature (min.) | 20 °c |
Bed temperature (max.) | 60 °c |
Recommended adhesion | igus™ adhesive film or glue stick on glass (Adhesive film imperative with non-heated pressure bed) |
Construction space | No closed installation space necessary |
Component cooling | A component cooling is not necessary, with cooling switched on it is also possible to print |
Additional information
| Weight | 0.75 kg |
|---|---|
| Filament Brand | iglidur™ |
| Filament Colour | White |
| Filament Diameter | 2.85mm |
| Filament Weight | 750gms |
| Shipping Notes | Ready for shipping in 2-3 working days |
| Filament Weight | 750gms |
| Filament Type | iglidur |
Be the first to review “iglidur I150-PF 3D Printing Filament 2.85mm 750gms”
You must be logged in to post a review.
Reviews
There are no reviews yet.