iglidur I151-PF 3D Printing Filament 1.75mm 750gms

iglidur I151-PF 3D Printing Filament 1.75mm 750gms

£101.99 £84.99 ex. VAT

In stock

£101.99 £84.99 ex. VAT

 (Avail 12 working days) Easy-to-process, abrasion-resistant filament

SKU: 56937


*This item is dropped shipped and usually dispatched within 12 working days.

3D printer filament: iglidur™ I151-PF

  • Simple processing
  • Suitable for all 3D printers
  • High abrasion resistance at low sliding speeds
  • Good mechanical properties
  • Food compliant according to FDA and EU Regulation 10/2011
  • Blue colour for optical detectability
  • Available also from our 3D printing service in 3 days
The iglidur i151 tribofilament is suitable for the printing of components with high wear resistance, as the material is filled with solid lubricants. It was specifically developed for use in the food and packaging industry: the printed components conform to FDA and EU Regulation 10/2011 and the blue colour ensures the required optical detectability. iglidur i151 is also an all-rounder material, and due to its good mechanical properties (strength, toughness, layer adhesion), it is suitable for most applications and 3D printers. It can be processed just as easily as standard PLA and PETG filaments. iglidur i151 has comparable mechanical specifications as iglidur i150, by far the most frequently used igus filament. There are restrictions in terms of the maximum permanent application temperature of 65°C and for highly dynamic applications. With the Bonding agent for tribofilaments iglidur i151 can be processed on conventional print bed surfaces (e.g. glass).
When to use it?

  • If the application requires a food-grade material according to FDA or EU 10/2011
  • When an optically detectable material is required
  • For applications with low or medium surface speeds (safe up to 0.2 m/s, test for higher speeds)
  • If you are looking for an easy-to-process tribofilament that can be processed on any 3D printer
  • If I have a 3D printer without a heated print bed

When do I not need it?

  • When the application temperature is higher than 65°C for a long time (→ iglidur i180-PF or iglidur J260-PF or iglidur A350-PF for food contact)
  • For highly dynamic applications (→ iglidur i180-PF)
  • If food conformity, according to FDA , and the blue colour are not necessary (→ iglidur i150-PF)


filament diameter1.75 mm
Outer diameter spool200 mm
Inner diameter spool52 mm
Spool width55 mm

General properties

Material suitable forBeginner
Max. moisture absorption (at 23 °C/73 °F, 50% r.h.)n.r.
Net weight750 g
Flexural strength43 MPa Flat printed
Density1.42 g/cm3

Physical and thermal properties

Max. long-term application temperature65 °C
Max. short-term application temperature75 °C
Lower application temperature-30 °C


Mould-free according to DIN EN ISA 846 Procedure ANo
Suitable for glue stickYes

Mechanical properties

Shore-D Hardness69, test method DIN 53505
Modulus of elasticity1,400 MPa, test method DIN 53457

Processing instructions

Nozzle temperature (min.)235 °C
Nozzle temperature (max.)245 °C
Bed temperature (min.)65 °C
Bed temperature (max.)80 °C
Construction spaceNo closed installation space is necessary

Additional information

Weight0.75 kg
Filament Brand


Filament Colour

Blue, Natural

Filament Diameter


Filament Weight


Shipping Notes

Ready for shipping in 2-3 working days

Filament Weight


Filament Type



There are no reviews yet.

Be the first to review “iglidur I151-PF 3D Printing Filament 1.75mm 750gms”