iglidur I180-PF 3D Printing Filament 2.85mm 750gms White

iglidur I180-PF 3D Printing Filament 2.85mm 750gms White

£125.99 £104.99 ex. VAT

In stock

£125.99 £104.99 ex. VAT

(Avail 4 working days) Versatile use: good combination of high wear resistance, strength and temperature resistant filament

SKU: 56770
Buy any 3 spools, get a spool of 3DQF re-worked PLA FREE


*This item is dropped shipped and usually dispatched within 4 working days.

3D printer filament: iglidur™ |180-BL-PF

Components made of igus™ Tribo-Filament are up to 50 times more wear-resistant than standard materials for 3D printing and therefore have an extremely long service life. Due to their excellent tribological properties, they are suited for 3D printing of replacement parts, for example bearings, drive nuts, gears and other wear parts. The igus™ Tribo-Filaments can be processed on 3D printers that are based on the fused-deposition-modelling method (FDM/FFF) and that allow the nozzle temperature to be set as required.

Typical application areas:

  • Special machine construction
  • Jig construction
  • Complex wear parts

Tribological 3D Printing Filament Tribology is the science and engineering of interacting surfaces in relative motion. It includes the study and application of the principles of friction, lubrication and wear.  Tribology is particularly important in today’s world because so much energy is lost to friction in mechanical components. To use less energy, we need to minimize the amount that is wasted. Significant energy is lost due to friction in sliding interfaces. Iglidur I180

  • iglidur™ I180 combines very high wear resistance with the highest strength of the iglidur™ tribo-filaments
  • Easier to process than iglidur™ I170 and iglidur™ J260
  • Processable on 3D Desktop printers, where standard ABS filaments are used
  • Upon the processing the printer must be enclosed in a case and te cooling fan must be off
  • Flexural strength: 46 / 33 MPa
  • Versatile use: good combination of high wear resistance, strength and temperature resistance
  • Good processing ability with an enclosed printer and igus adhesive film
  • Colour black

For a comprehensive overview of the Tribology filament specifications and tests view here.

Tested strength when compared to machined and injection-moulded parts Up to 50 x higher abrasion resistance

Test parameters – wear test swivelling Surface pressure: 1MPa Surface speed: 0.01m/s Pivoting angle: 60∞ Duration: four weeks Shaft materials: CF53 and 304 SS Test result: the pivot test shows that the abrasion resistance of the iglidur™ filament is up to 50 times higher than the standard 3D printing materials (e.g. ABS).

General properties



Material suitable for


Max. moisture absorption (at 23 °c/73 ∞F, 50% r.h.)

0.3 Wt.-%, test method DIN 53495

Max. water absorption

0.9 Wt.-%

Net weight

250 g

Coefficient of sliding friction, dynamic, against Cf53 steel


Coefficient of sliding friction, dynamic, against 304 stainless steel


pv value, max. (dry)

0.23 MPa m/s

Flexural strength

46 / 33 MPa

Physical and thermal properties

Max. long-term application temperature

80 °c

Max. short-term application temperature

90 °c

Lower application temperature

-40 °c

Thermal expansion coefficient (at 23°c/73∞F)

9 K-1 10-5, test method DIN 53752

Heat conductivity

0.23 W/(m K), test method ASTM C 177

Pressure load

59 MPa

Max. recommended surface pressure (at +20 °c/68 ∞F)

30 MPa


Mould-free according to DIN EN ISA 846 Procedure A


Processing instructions

Nozzle temperature (min.)

250 °c

Nozzle temperature (max.)

260 °c

Bed temperature (min.)

90 °c

Bed temperature (max.)

110 °c

Recommended adhesion

igus™ adhesive film

Construction space

Closed installation space necessary

Component cooling

A component cooling is not necessary, with cooling switched on it is also possible to print


Additional information

Weight0.75 kg
Filament Brand


Filament Colour


Filament Diameter


Filament Weight


Shipping Notes

Ready for shipping in 2-3 working days

Filament Weight


Filament Type



There are no reviews yet.

Be the first to review “iglidur I180-PF 3D Printing Filament 2.85mm 750gms White”