![laybrick-1.75mm-3d-printing-filament-by-kai-parthy-[2]-1718-p](https://3dfilaprint.com/wp-content/uploads/2021/11/laybrick-1.75mm-3d-printing-filament-by-kai-parthy-2-1718-p-150x150.jpg)
![laybrick-1.75mm-3d-printing-filament-by-kai-parthy-[3]-1718-p](https://3dfilaprint.com/wp-content/uploads/2021/11/laybrick-1.75mm-3d-printing-filament-by-kai-parthy-3-1718-p-150x150.jpg)
![laybrick-by-kai-parthy-cc-products-[3]-224-p](https://3dfilaprint.com/wp-content/uploads/2021/11/laybrick-by-kai-parthy-cc-products-3-224-p-150x150.jpg)
LayBrick 3mm 3D Printing filament Kai Parthy
£17.15 £20.58 inc. VAT £10.00 £12.00 inc. VAT
A wonderful clay like material, perfect for architectural 3D prints
- Description
- What is PLA?
- Additional information
- Reviews (0)
Description
LayBrick 3D printer filament has been developed by Kai Parthy, along with the other premium filaments LAYWOOD-D3 LAYWOO-D3 FLEX and the amazing POROLAY range of filaments, which we also have in stock.
If you are new to Laybrick this is worth a read printing with LayBrick.
You can also see some of the prints created using LayBrick on our online guide here https://3dfilaprint.com/help.
filament can be used for very large objects (make sure you have a big enough bed) as it has almost Zero warp. The filament is available in both 3mm & 1.75mm in a 5 Metre wrap and a full coil which weighs approximately 250 gms. length of one whole 3mm coil is approximately 28 metres.
Printing within a 165‚àûC – 190‚àûC temperature range, produces a smoother finish, while higher temperatures, above 210‚àûC, produces the rougher, sandstone like finish. filament should be printed on a cold bed. As with some other filaments you may have to adjust settings to get the best prints.
LayBrick is perfect for sculpture modelling and architectural pieces. You can check out the 3ders insight into LayBrick here http://goo.gl/vvVm3t
Manufacturer recommended printer temperatures.
Extrusion Temp: 175‚à´C – 250‚à´C
Platform Temp: Heated bed not required
Platform Materials: None Required
Please note, the above temperatures are only a guide.
PLA
Overview
PLA is easy to print, at low cost. Non-toxic and Eco friendly. A perfect starting point for people new to 3D printing.
PLA is created from all-natural renewable resources, and under the correct conditions, is fully biodegradable. This material is typically used for prototypes or decorative prints; Due to the low temperatures and ease of use, features tend to print sharper and more detailed. Its non-toxic nature means that it can be printed for food and medical applications if done so from a sterile and sanitized environment.
However, PLA prints are prone to snapping and breaking under pressure, and become damaged and discolored from high temperatures and prolonged exposure to sunlight or water.
Used for: Design prototypes, Plastic Cups, Medical Implants, Food containers.
Printability
Very Easy
Pros
- Low Cost
- Easy to Print
- Eco Friendly
- Does Not Warp
Cons
- Less robust than other materials
- Vulnerable to Water and sunlight
Recommended Settings
Print Temp
180°C -210°C
Cooling Fan on
Temp may vary on brand
Bed Temp
Temp may vary on brand
Print Surface
No Heated Bed Required
No Enclosure Required
Example Prints
Additional information
| Weight | 0.25 kg |
|---|---|
| Dimensions | 300 × 250 × 30 mm |
| Filament Brand | Kai Parthy |
| Filament Colour | Beige |
| Filament Diameter | 3mm |
| Filament Type | PLA |
| Filament Weight | 250gms |
| Filament Weight | 250gms |
Be the first to review “LayBrick 3mm 3D Printing filament Kai Parthy”
You must be logged in to post a review.
Reviews
There are no reviews yet.