Matte Fiber HTPLA – Daffodil Wood 1.75mm 3D printing Filament 500gms

Matte Fiber HTPLA – Daffodil Wood 1.75mm 3D printing Filament 500gms

£38.40 £32.00 ex. VAT

Out of stock

£38.40 £32.00 ex. VAT

A light yellow with elegant sheen and sophisticated texture.  Daffodil wood is closest to a traditional unfinished wood colour.  Great for rigid, artistic prints with no special hardware required.

Availability: Out of stock SKU: 640970864518

Want to be notified when this product is back in stock?


Matte Fibre HTPLA Honey with a Premium Wood Like Finish

Please note this material is definitely more brittle than your regular PLA filament, so make sure there are no sharp filament feeding angles from the spool to the nozzle.  Get that right and you will adore this filament!

  • A light yellow with elegant sheen and sophisticated texture
  • Daffodil is closest to a traditional unfinished wood colour
  • Great for rigid, artistic prints with no special hardware required
  • An Endless Pastabilities filament with inspiration from nature
  • Designed & produced by Protoplant, makers of Protopasta


An extension of our Matte Fiber line, these rich colours are enhanced with small black flecks to create a wood-like appearance. Ranging from a beautiful soft yellow to deep, dark walnut, weve covered the spectrum and are excited to share their beauty with all of you!

These materials are based in Matte Fiber, but with fine gold pearl and black flecks, bringing warmth, radiance, and texture with just the right tones and sheen youd expect for a premium wood-like finish.

All example parts were printed as follows for a balance of quality, speed, and reliability:

Machine(s): Prusa MK2/3, Creality Ender 3
Nozzle: 0.4 mm standard brass w/ sock
Nozzle Temp: 205C Bed Temp: 60C Bed Type: Glass, PEI, BuildTak, or other
Bed Prep: Clean w/ water or alcohol; Magigoo, DimaFix or 3DLac for additional adhesion + easy release when cool.


Outlines: 3 Top/Bot layers: 6 Infill type: Lines Infill: 25%
Overlaps: 0 Min layer time: 0 Min Speed: 0 Fill gaps: no Expansion: 0



Layer height

Ext width



1st Layer





Rest of print






Matte Fiber can create beautiful, rigid parts that dont even look 3D printed. Like wood, Matte Fiber does not bend much before breaking. Please dont use excessive force when loading and printing. Matte Fiber also absorbs moisture like wood, and should be printed at the lowest possible temperature to minimize stringing, over-extrusion, and jamming.


Check out Proto-pasta’s blog here and some handy how-to guides here



PLA is easy to print, at low cost. Non-toxic and Eco friendly. A perfect starting point for people new to 3D printing.

PLA is created from all-natural renewable resources, and under the correct conditions, is fully biodegradable. This material is typically used for prototypes or decorative prints; Due to the low temperatures and ease of use, features tend to print sharper and more detailed. Its non-toxic nature means that it can be printed for food and medical applications if done so from a sterile and sanitized environment. 
However, PLA prints are prone to snapping and breaking under pressure, and become damaged and discolored from high temperatures and prolonged exposure to sunlight or water. 

Used for: Design prototypes, Plastic Cups, Medical Implants, Food containers.






Very Easy



Recommended Settings

Print Temp

180°C -210°C

Cooling Fan on

Temp may vary on brand

Bed Temp

0°C – 45°C

Temp may vary on brand

Print Surface

No Heated Bed Required
No Enclosure Required

Example Prints

Additional information

Weight0.5 kg
Dimensions200 × 200 × 55 mm
Filament Type


Filament Diameter


Filament Brand


Filament Weight


Filament Range

Proto-pasta HTPLA

Filament Colour


Filament Properties

High Strength


There are no reviews yet.

Be the first to review “Matte Fiber HTPLA – Daffodil Wood 1.75mm 3D printing Filament 500gms”