![matte-fiber-htpla-honey-wood-1.75mm-3d-printing-filament-[2]-23518-1-p](https://3dfilaprint.com/wp-content/uploads/2021/11/matte-fiber-htpla-honey-wood-1.75mm-3d-printing-filament-2-23518-1-p-150x150.jpg)
![matte-fiber-htpla-honey-wood-1.75mm-3d-printing-filament-[3]-23518-p](https://3dfilaprint.com/wp-content/uploads/2021/11/matte-fiber-htpla-honey-wood-1.75mm-3d-printing-filament-3-23518-p-150x150.jpg)
Matte Fiber HTPLA – Honey Wood 1.75mm 3D printing Filament
£32.00 £38.40 inc. VAT £28.80 £34.56 inc. VAT
A pale orange HTPLA with an elegant sheen and sophisticated texture. Honey HTPLA is a darker and more reddish than Daffodil. Great for rigid, artistic prints with no special hardware required
Want to be notified when this product is back in stock?
- Description
- What is PLA?
- Additional information
- Reviews (0)
Description
Matte Fibre HTPLA Honey with a Premium Wood Like Finish
Please note this material is definitely more brittle than your regular PLA filament, so make sure there are no sharp filament feeding angles from the spool to the nozzle. Get that right and you will adore this filament!
- A pale orange with elegant sheen and sophisticated texture
- Honey is a darker and more reddish than Daffodil
- Great for rigid, artistic prints with no special hardware required
- An Endless Pastabilities filament with inspiration from nature
- Designed & produced by Protoplant, makers of Protopasta
An extension of our Matte Fiber line, these rich colours are enhanced with small black flecks to create a wood-like appearance. Ranging from a beautiful soft yellow to deep, dark walnut, weve covered the spectrum and are excited to share their beauty with all of you!
These materials are based in Matte Fiber, but with fine gold pearl and black flecks, bringing warmth, radiance, and texture with just the right tones and sheen youd expect for a premium wood-like finish.
All example parts were printed as follows for a balance of quality, speed, and reliability:
Machine(s): Prusa MK2/3, Creality Ender 3
Nozzle: 0.4 mm standard brass w/ sock
Nozzle Temp: 205C Bed Temp: 60C Bed Type: Glass, PEI, BuildTak, or other
Bed Prep: Clean w/ water or alcohol; Magigoo, DimaFix or 3DLac for additional adhesion + easy release when cool.
Outlines: 3 Top/Bot layers: 6 Infill type: Lines Infill: 25%
Overlaps: 0 Min layer time: 0 Min Speed: 0 Fill gaps: no Expansion: 0
Layer height | Ext width | Speed | Fan | |
1st Layer | 0.20mm | 0.50mm | 20mm/s | 0% |
Rest of print | 0.15mm | 0.45mm | 30mm/s | 100% |
Matte Fiber can create beautiful, rigid parts that dont even look 3D printed. Like wood, Matte Fiber does not bend much before breaking. Please dont use excessive force when loading and printing. Matte Fiber also absorbs moisture like wood, and should be printed at the lowest possible temperature to minimize stringing, over-extrusion, and jamming.
Check out Proto-pasta’s blog here and some handy how-to guides here
PLA
Overview
PLA is easy to print, at low cost. Non-toxic and Eco friendly. A perfect starting point for people new to 3D printing.
PLA is created from all-natural renewable resources, and under the correct conditions, is fully biodegradable. This material is typically used for prototypes or decorative prints; Due to the low temperatures and ease of use, features tend to print sharper and more detailed. Its non-toxic nature means that it can be printed for food and medical applications if done so from a sterile and sanitized environment.
However, PLA prints are prone to snapping and breaking under pressure, and become damaged and discolored from high temperatures and prolonged exposure to sunlight or water.
Used for: Design prototypes, Plastic Cups, Medical Implants, Food containers.
Printability
Very Easy
Pros
- Low Cost
- Easy to Print
- Eco Friendly
- Does Not Warp
Cons
- Less robust than other materials
- Vulnerable to Water and sunlight
Recommended Settings
Print Temp
180°C -210°C
Cooling Fan on
Temp may vary on brand
Bed Temp
Temp may vary on brand
Print Surface
No Heated Bed Required
No Enclosure Required
Example Prints
Additional information
| Weight | 0.5 kg |
|---|---|
| Dimensions | 200 × 200 × 55 mm |
| Filament Brand | proto-pasta |
| Filament Colour | Brown |
| Filament Diameter | 1.75mm |
| Filament Type | PLA |
| Filament Weight | 500gms |
| Filament Weight | 500gms |
| Filament Range | Proto-pasta HTPLA |
| Filament Properties | High Strength |
Reviews
There are no reviews yet.