NinjaFlex 85A TPU Orange Lava 3mm Flexible 3D Printer Filament 500gms

NinjaFlex 85A TPU Orange Lava 3mm Flexible 3D Printer Filament 500gms

£32.27 £38.72 inc. VAT

In stock

£32.27 £38.72 inc. VAT

Strong & flexible, a filament that can be used in so many applications, from medical to industrial.

Availability: In stock SKU: 3DNF0529005
View basket

Description

Not sure what flexible to go for? What is shore hardness? Here is our handy guide to hep you pick the right material for your print. Click here to view our Flexible and Shore Hardness guide
 
 

Open a world of possibilities, limited only by your imagination. NinjaFlex, a cutting-edge filament for 3D printers, is a specially formulated thermoplastic polyurethane (TPU) that produces flexible prints with elastic properties. Patent pending technology allows for smooth feeding and clean, high-quality printed parts.

 

NINJAFLEX

NinjaFlex flexible filament leads the industry thanks to its superior flexibility and longevity compared to non-polyurethane materials. Its consistency in diameter and ovality (roundness) outpaces other polyurethane materials. Made from a specially formulated thermoplastic polyurethane (TPU) material, this patented technology boasts a low-tack, easy-to-feed texture. The result is uniquely flexible, strong prints ideal for direct-drive extruders. Suggested Applications: Seals, gaskets, plugs, leveling feet, protective applications. You can check out the 3ders insight into NinjaFlex here http://goo.gl/7IW5ZF

  •  Shore Hardness = 85A
  •  Truly flexible (no fill or layer manipulation required to achieve performance)
  •  660% elongation allows for repeated movement and impact without wear or cracking
  •  Polyurethane composition allows for excellent vibration reduction
  •  Patented low friction exterior allows for smooth feeding
  •  Abrasion resistance 20% better than ABS and 68% better than PLA
  •  Consistent diameter and material properties providing reliable, high quality prints
  •  Chemical resistant to many materials, including naphtha, ASTM Oils #1-3, petroleum and freon
  •  Adheres to all standard build platforms without glue or tape
  •  REACH and RoHS 2002/95/EC Directive compliant

Extruder Temperature:  225‚C 235‚C Platform Temperature: Room temperature 40‚C Glue and/ or blue painters tape is suggested if not using a heated bed. Print Speed: Top and bottom layers: 10-20 mm/ sec (600-1200 mm/ min) Infill speeds: 15-35 mm/ sec (900-2100 mm/ min) Layer 2+ use cooling fan if available. Tips & Tricks Safety: We recommend printing in a well-ventilated area for use with all of our materials. TPEs are capable of releasing small amounts of fumes at high temperatures. Finishing parts: Best results are achieved using a dremel or a hot knife for smoothing rough surfaces. It is also tolerant to cutting and light drilling as required for an application. Connecting printed parts: Welding is the best option. Plastic welders, soldering irons, wood burners or heat guns are ideal. NinjaFlex will also bond to other plastics using the same method. Injection molding: NinjaFlex is available in pellet form and is useable for injection molding in addition to pellet extrusion. Bridging: NinjaFlex is not ideal for bridging, though it can handle some small areas in unsupported applications. Water resistance: Occasional contact with water will have no adverse effect on NinjaFlex, but long-term exposure will degrade the material to the point in which its elastic properties will be reduced. UV Resistance: NinjaFlex is not recommended for long-term continuous outdoor use as it has no UV stabilizer. However, it does boast higher UV performance over ABS & PLA . Short term usage is suitable, with an estimated 4-6 months before seeing any degradation.

Football Helmet

Sports

From sneaker insoles to helmet inserts, NinjaFlex can protect athletes with its vibration dampening properties.
Medical Bag

Healthcare

NinjaFlex is strong and flexible for applications like prosthetics and realistic organ prototypes.
 
Factory

Industrial Manufacturing

Test your new designs with a 3D-printed prototype or quickly create end-use parts for your equipment.

            

   

Additional information

Weight0.5 kg
Filament Brand

NinjaTek™

Filament Colour

Orange

Filament Diameter

3mm

Filament Properties

Flexible

Filament Type

TPU

Filament Weight

500gms

Filament Weight

500gms

Filament Range

NinjaFlex 85A TPU

Reviews

There are no reviews yet.


Be the first to review “NinjaFlex 85A TPU Orange Lava 3mm Flexible 3D Printer Filament 500gms”

The maximum upload file size: 5 MB. You can upload: image, audio, video, document, spreadsheet, interactive, text, archive, code, other. Links to YouTube, Facebook, Twitter and other services inserted in the comment text will be automatically embedded. Drop file here

You may also like…