15% OFF

NinjaFlex 85A TPU White Snow 1.75mm Flexible 3D Printer Filament 500gms

NinjaFlex 85A TPU White Snow 1.75mm Flexible 3D Printer Filament 500gms

£34.00 £40.80 inc. VAT

In stock

£34.00 £40.80 inc. VAT

Strong & flexible, a filament that can be used in so many applications, from medical to industrial.

Availability: In stock SKU: 3DNF0017505
Add to QuoteView basket


Not sure what flexible to go for? What is shore hardness? Here is a handy guide to hep you pick the right material for your print. Click here to view Flexible and Shore Hardness guide

Open a world of possibilities, limited only by your imagination. NinjaFlex, a cutting-edge filament for 3D printers, is a specially formulated thermoplastic polyurethane (TPU) that produces flexible prints with elastic properties. Patent pending technology allows for smooth feeding and clean, high-quality printed parts.



The Market Leading Flexible Filament

NinjaFlex flexible filament leads the industry thanks to its superior flexibility and longevity compared to non-polyurethane materials. Its consistency in diameter and ovality (roundness) outpaces other polyurethane materials.

Made from a specially formulated thermoplastic polyurethane (TPU) material, this patented technology boasts a low-tack, easy-to-feed texture. The result is uniquely flexible, strong prints ideal for direct-drive extruders.

Suggested Applications: Seals, gaskets, plugs, leveling feet, protective applications.

You can check out the 3ders insight into NinjaFlex here http://goo.gl/7IW5ZF

  •  Shore Hardness = 85A
  •  Truly flexible (no fill or layer manipulation required to achieve performance)
  •  660% elongation allows for repeated movement and impact without wear or cracking
  •  Polyurethane composition allows for excellent vibration reduction
  •  Patented low friction exterior allows for smooth feeding
  •  Abrasion resistance 20% better than ABS and 68% better than PLA
  •  Consistent diameter and material properties providing reliable, high quality prints
  •  Chemical resistant to many materials, including naphtha, ASTM Oils #1-3, petroleum and freon
  •  Adheres to all standard build platforms without glue or tape
  •  REACH and RoHS 2002/95/EC Directive compliant

3.00mm filament spool = .5 kg

Extruder Temperature:  225‚C 235‚C
Platform Temperature: Room temperature 40‚C
Glue and/ or blue painters tape is suggested if not using a heated bed.

Print Speed:
Top and bottom layers: 10-20 mm/ sec (600-1200 mm/ min)
Infill speeds: 15-35 mm/ sec (900-2100 mm/ min)
Layer 2+ use cooling fan if available.

Tips & Tricks

We recommend printing in a well-ventilated area for use with all of our materials. TPEs are capable of releasing small amounts of fumes at high temperatures.

Finishing parts:
Best results are achieved using a dremel or a hot knife for smoothing rough surfaces. It is also tolerant to cutting and light drilling as required for an application.

Connecting printed parts:
Welding is the best option. Plastic welders, soldering irons, wood burners or heat guns are ideal. NinjaFlex will also bond to other plastics using the same method.

Injection molding:
NinjaFlex is available in pellet form and is useable for injection molding in addition to pellet extrusion.

NinjaFlex is not ideal for bridging, though it can handle some small areas in unsupported applications.

Water resistance:
Occasional contact with water will have no adverse effect on NinjaFlex, but long-term exposure will degrade the material to the point in which its elastic properties will be reduced.

UV Resistance:
NinjaFlex is not recommended for long-term continuous outdoor use as it has no UV stabilizer. However, it does boast higher UV performance over ABS & PLA . Short term usage is suitable, with an estimated 4-6 months before seeing any degradation.

Case Studies:

3D Printed Suction Inducing Screen Prevents Material from Escaping

3D Printed Clutch Lever Boot Replacement for 1963 Volvo Wagon

3D Printed Columns Improve Bike Seat Suspension

3D Printed Plug Prevents Material From Escaping




Additional information

Weight0.5 kg
Filament Brand


Filament Colour


Filament Diameter


Filament Weight


Filament Weight


Filament Type

Flexible TPU


There are no reviews yet.

Be the first to review “NinjaFlex 85A TPU White Snow 1.75mm Flexible 3D Printer Filament 500gms”

The maximum upload file size: 5 MB. You can upload: image, audio, video, document, spreadsheet, interactive, text, archive, code, other. Links to YouTube, Facebook, Twitter and other services inserted in the comment text will be automatically embedded. Drop file here

You may also like…