Nylon 230 2.85mm 3D Printer Filament **Reduced**
£16.54 £19.85 inc. VAT £11.58 £13.90 inc. VAT
Nylon 230 is a lower temperature nylon developed by taulman3D specifically for 3D Printing on systems that have cold print beds and lower temp capabilities.
- Description
- What is Nylon?
- Additional information
- Reviews (0)
Description
Need strength, durability in a nylon that is chemical resistant, which can be printed on a non heated bed, then Nylon 230 is the material for you. It can be printed at 230c on platform with a little glue, hairspray, MAXX, Purple UHU or your other other favourite recipes.
Nylon 230
Nylon 230 is a lower temperature nylon developed by taulman3D specifically for 3D Printing on systems that have cold print beds and lower temp capabilities.
Users should coat their print bed with the application of Elmer’s Glue Stick Glue or similar products.
Potential uses:
Gears – light load
Fan blades
Housings
Phone covers
Protective covers/enclosures.
Cosmetics containers
Nylon
Overview
Highly durable, flexible material.
Nylon has high impact and abrasion resistance; offering a high amount of tensile strength whilst also being a flexible material. It is one of the most heat-stable filaments, remaining unchanged in high temperature environments.
It is hygroscopic, meaning that the filament will absorb moisture easily which will cause prints to warp and fail. This can be circumvented by keeping the filament in an air-tight, dry environment. Nylon can warp easily; depending on the printer and slicer used, some trial and error may be needed to prevent this. Printed items will degrade from UV radiation if left in sunlight for long periods of time.
Used for: Gears, Screws, and Cable ties.
Some manufacturers provide PA6 & PA12 Nylons, PA12 has increased moisture stability and is more resistant to moisture absorption. The same applies to Nylon 66 compared to Nylon 6.
Printability
Difficult
Pros
- High Strength
- Flexible Material
- Heat Resistant
Cons
- High Temperature Required
- Warps Easily
- Vulnerable to Sunlight
Recommended Settings
Print Temp
Cooling Fan Off
Temp may vary on brand
Bed Temp
Temp may vary on brand
Print Surface
Heated Bed Required
Enclosure Required
Example Prints
Additional information
| Weight | 0.5 kg |
|---|---|
| Dimensions | 210 × 210 × 115 mm |
| Filament Brand | taulman 3D |
| Filament Colour | White |
| Filament Diameter | 2.85mm |
| Filament Weight | 500gms |
| Filament Weight | 500gms |
Be the first to review “Nylon 230 2.85mm 3D Printer Filament **Reduced**”
You must be logged in to post a review.
Reviews
There are no reviews yet.