Polymaker Polymide Nylon CoPA Natural 1.75mm 3D Printing Filament
£49.10 £40.92 ex. VAT
Polymaker Nylon CoPA 6/6-6 is the new Nylon filament from PolyMaker boasting the incredible strength and heat resistance that Nylon has to offer, now with minimal warping. Polymaker Nylon CoPA 6/6-6 is a truly practical 3D printing material which can print on any extrusion based 3D printer (>250∞C).
- Description
- What is Nylon?
- Additional information
- Reviews (0)
Description
If you are thinking of 3D printing a car with this material – You Can!
PolyMaker Nylon CoPA 6/6-6 – PolyMaker’s new Nylon based filament has been produced using the highest quality raw material and featuring Warp Free Technology developed by PolyMaker material scientists. Warp Free technology involves the fine control of microstructure and crystallisation behaviour of Polyamide CoPA which allows the material to fully release the internal stress before solidification. This enables the near zero warpage when printing with PolyMaker Nylon CoPA 6/6-6.
PolyMaker Nylon CoPA 6/6-6 is the new Nylon filament from PolyMaker. Created from a blend of engineering grade nylon the CoPA is a co polymer based from Nylon 6 and Nylon 6.6. PolyMaker has solved the problem facing all other nylons by controlling the crystallization rate of the polyamide polymer. This means PolyMaker Nylon CoPA 6/6-6 can print without a heated chamber or even a heated bed, displaying minimal warping while still boasting the incredible strength and heat resistance that Nylon has to offer. PolyMaker Nylon CoPA 6/6-6 is a truly practical 3D printing material which can print on any extrusion based 3D printer (>250°c).
Material Specs
Diameters 1.75 mm or 2.85 mm Recommended Printing Temp* 250 265 °c Recommended Printing Speed* 40 90 mm/s The PolyBox the perfect low cost accessory for your PolyMaker range of filaments here. 
Nylon
Overview
Highly durable, flexible material.
Nylon has high impact and abrasion resistance; offering a high amount of tensile strength whilst also being a flexible material. It is one of the most heat-stable filaments, remaining unchanged in high temperature environments.
It is hygroscopic, meaning that the filament will absorb moisture easily which will cause prints to warp and fail. This can be circumvented by keeping the filament in an air-tight, dry environment. Nylon can warp easily; depending on the printer and slicer used, some trial and error may be needed to prevent this. Printed items will degrade from UV radiation if left in sunlight for long periods of time.
Used for: Gears, Screws, and Cable ties.
Some manufacturers provide PA6 & PA12 Nylons, PA12 has increased moisture stability and is more resistant to moisture absorption. The same applies to Nylon 66 compared to Nylon 6.
Printability
Difficult
Pros
- High Strength
- Flexible Material
- Heat Resistant
Cons
- High Temperature Required
- Warps Easily
- Vulnerable to Sunlight
Recommended Settings
Print Temp
Cooling Fan Off
Temp may vary on brand
Bed Temp
Temp may vary on brand
Print Surface
Heated Bed Required
Enclosure Required
Example Prints
Additional information
| Weight | 0.75 kg |
|---|---|
| Dimensions | 210 × 210 × 75 mm |
| Filament Brand | Polymaker™ |
| Filament Colour | Natural |
| Filament Diameter | 1.75mm |
| Filament Type | Nylon |
| Filament Weight | 750gms |
| Filament Weight | 750gms |
| Filament Range | Polymaker CoPA |
Be the first to review “Polymaker Polymide Nylon CoPA Natural 1.75mm 3D Printing Filament”
You must be logged in to post a review.
Reviews
There are no reviews yet.