Polymaker PolyFlex TPU-95A 1.75mm White filament 750gms
£25.40 £21.17 ex. VAT
PolyFlex TPU-95A, a flexible and elastic filament in one, excellent quality. A filament that just works, even on the majority of 3D Desktop printers, straight off the spool. Superb quality finish, excellent layer adhesion, with absolutely no warping! A filament you will just want to print, print and print again.
- Description
- Additional information
- Reviews (0)
Description
Compare all Polymaker materials and colours here
Flexible : PolyFlex features a Shore A hardness of 95A and a large strain-to-failure of over 400%. These arent just figures on a page, but are tested values obtained from actual printed parts. What this means is that PolyFlex gives you cool flexible parts with no worry about the part breaking. PolyFlex is truly your best tool for creating fun flexible parts.

Not sure what flexible to go for? What is shore hardness? Here is a handy guide to help you pick the right material for your print. Click here to view Flexible and Shore Hardness guide

Flexible : PolyFlex features a Shore A hardness of 95A and a large strain-to-failure of over 400%. These arent just figures on a page, but are tested values obtained from actual printed parts. What this means is that PolyFlex gives you cool flexible parts with no worry about the part breaking. PolyFlex is truly your best tool for creating fun flexible parts.

Printer Compatibility: One of our main goals when developing PolyFlex was to make it easy for everyone to use. Flexible filaments are known to be difficult to work with. Well not any more. PolyFlex is designed to be compatible with almost all desktop FDM/FFF printers and requires no hardware modification. Not only does it print smoothly but adheres well to a large variety of surfaces with no need for a heated build plate leaving you to think about nothing other than what model your going to print.

Flex-up Your Imagination : The soft and flexible nature of PolyFlex opens up a new dimension of what one can do with desktop 3D printers, clothing, shoes, wearables, prostheticsyou name it. The possibilities are endless.
Spool Specs

Glass Transition Temp
N/A
Filament Melting Point
200 210 °c (392 410 ∞F)
Density
1.17 1.24 g/cm3
Diameters
1.75 mm or 3 mm
Tolerance
± 0.05 mm
50 Microns
(Typical~ 0.02 mm )
View a video of the properties of PolyFlex here.
The 750gms spool of filament is delivered to you FREE OF CHARGE (within the UK) in a vacuumed sealed, silver lined plastic bag, complete with a sachet of silica gel.
Printing temperature between 210C and 230C.
Glass with glue, blue tape, BuildTak™ In fact Polyflex prints well on most 3D Printing platforms.
Visit here for more information
You can read a thorough review of the Polymaker PolyFlex by Ian Hiscock by clicking the PDF icon below.
Additional information
Weight | 0.75 kg |
---|---|
Dimensions | 210 × 210 × 75 mm |
Filament Brand | Polymaker™ |
Filament Colour | White |
Filament Diameter | 1.75mm |
Filament Type | TPU |
Filament Weight | 750gms |
Filament Weight | 750gms |
Filament Range | PolyFlex TPU-95A |
Be the first to review “Polymaker PolyFlex TPU-95A 1.75mm White filament 750gms”
You must be logged in to post a review.
Reviews
There are no reviews yet.