![polymaker-polylite-petg-2.85mm-yellow-3d-printing-filament-1kg[3]-15691-p](https://3dfilaprint.com/wp-content/uploads/2021/10/polymaker-polylite-petg-2.85mm-yellow-3d-printing-filament-1kg3-15691-p-150x150.jpg)
PolyMaker PolyLite PETG 2.85mm Clear 3D FilaPrint filament 1Kg
£25.39 £21.16 ex. VAT
PolyLite PETG is an affordable PETG filament with balanced mechanical properties and ease of printing.
- Description
- What is PET-G?
- Additional information
- Hueforge Settings
- Reviews (0)
Description
General Printing Settings Print Temperature Range: 230 240 °c Recommended 3D print speed: 30 50 mm/s Bed temperature: 70 80 °c
Build platform: The PolyLite 3D printing filament works well with the majority of 3D printer surfaces. Though if you require additional adhesion, check out the links below. Dimaafix 3DLac Adhesion Spray LokBuild PrintBite
PET-G
Overview
A versatile middle ground between PLA and ABS.
PET-G Is stronger than PLA but easier to print with than ABS. The glycol in this material makes the filament less brittle and resistant to water, chemicals, and solvents. It is naturally clear, making it the go-to filament for translucent prints.
The strength and durability of a PET-G filament vary depending on the brand. An easy way to check if one PET-G is stronger than another is by comparing the tensile strength value of each filament. If printed in a sterile, FDA-approved environment, PET-G can be used to create food-safe prints.
Due to its strong and durable nature, PET-G can be difficult to finish with post-processing methods such as sanding. Prints may also be difficult to paint or glue together. Depending on printer and slicer settings, you may experience small hairs over the surface of prints caused by stringing. These can be removed with a heat gun or lighter.
Used for: Water Bottles, Plant Pots.
Printability
Medium
Pros
- Water Resistant
- Naturally Translucent
- Decent Strength and Durability
Cons
- Printer Tuning Required
- Difficult to Post-Process
- Stringing can Occur
Recommended Settings
Print Temp
Cooling Fan On
Temp may vary on brand
Bed Temp
Temp may vary on brand
Print Surface
No Heated Bed Required
No Enclosure Required
Example Prints
Additional information
| Weight | 1 kg |
|---|---|
| Dimensions | 210 × 210 × 75 mm |
| Filament Brand | Polymaker™ |
| Filament Colour | Transparent |
| Filament Diameter | 2.85mm |
| Filament Type | PETG |
| Filament Weight | 1kg |
| Filament Weight | 1Kg |
| Filament Range | PolyLite PETG |
| TD Range | TD for HueForge | Hex Code |
|---|---|---|
| 14.0-14.25 | 14 | N/A |
| You can download the full Polymaker library ready to import into Hueforge here. Please be aware this will replace your current library of filaments. | ||
Be the first to review “PolyMaker PolyLite PETG 2.85mm Clear 3D FilaPrint filament 1Kg”
You must be logged in to post a review.
Reviews
There are no reviews yet.