PolyMide PA6-CF Black 1.75mm 3D Printing filament Sample

PolyMide PA6-CF Black 1.75mm 3D Printing filament Sample

£4.74 £3.95 ex. VAT

Out of stock

£4.74 £3.95 ex. VAT

PolyMide PA6-CF is a carbon fibre†reinforced PA6 (Nylon 6) filament. Providing significantly improved stiffness, strength and heat resistance with outstanding layer adhesion.††PolyMide PA6-CF is also an ESD safe material making it a suitable candidate for printing electronic jigs and fixtures.

Availability: Out of stock SKU: 6938936711551-S

Want to be notified when this product is back in stock?


Compare all Polymaker materials and colours here

PolyMide™ is a family of Nylon/polyamide based filaments. Produced with Polymaker’s Warp-Free™ technology, PolyMide™ filaments deliver engineering properties intrinsic to Nylon and ease of printing. PolyMide™ PA6-CF is a carbon fiber reinforced PA6 (Nylon 6) filament. The carbon fiber reinforcement provides significantly improved stiffness, strength and heat resistance with outstanding layer adhesion.

PolyMide™ PA6 CF features Polymaker’s Warp-Free™ technology and Fiber Adhesion™ technology: Warp-Free™ technology enables the production of Nylon-based filaments that can be 3D printed with excellent dimensional stability and near-zero warpage. This is achieved by the fine control of microstructure and crystallization behavior of Nylon, which enables the material to fully release the internal stress before solidification.
Fiber Adhesion™ technology improves the layer adhesion of fiber reinforced materials, by optimizing the surface chemistry of the fibers to achieve better dispersion and bonding to the matrix. This results in better strength along the Z-axis and reduced mechanical anisotropy

Build platform: The PolyMax 3D printing filament works well with the majority of 3D printer surfaces. Though if you require additional adhesion, check out the links below. Dimaafix 3DLac Adhesion Spray LokBuild PrintBite




Highly durable, flexible material.

Nylon has high impact and abrasion resistance; offering a high amount of tensile strength whilst also being a flexible material. It is one of the most heat-stable filaments, remaining unchanged in high temperature environments. 

It is hygroscopic, meaning that the filament will absorb moisture easily which will cause prints to warp and fail. This can be circumvented by keeping the filament in an air-tight, dry environment. Nylon can warp easily; depending on the printer and slicer used, some trial and error may be needed to prevent this. Printed items will degrade from UV radiation if left in sunlight for long periods of time.

Used for: Gears, Screws, and Cable ties.

Some manufacturers provide PA6 & PA12 Nylons, PA12 has increased moisture stability and is more resistant to moisture absorption. The same applies to Nylon 66 compared to Nylon 6.




Very High





Recommended Settings

Print Temp

225°C -265°C

Cooling Fan Off

Temp may vary on brand

Bed Temp

70°C – 90°C

Temp may vary on brand

Print Surface

Heated Bed Required
Enclosure Required

Example Prints

Additional information

Weight0.035 kg
Filament Colour


Filament Diameter

1.75mm – 10 Meters

Filament Properties

ESD Safe

Filament Type

Carbon Fibre, Nylon

Filament Range

PolyMide Nylons

Filament Brand



There are no reviews yet.

Be the first to review “PolyMide PA6-CF Black 1.75mm 3D Printing filament Sample”