PolySmooth Pink 2.85mm 750gms 3D Printing Filament

AN ENTIRELY NEW 3D PRINTING FILAMENT TO DRAMATICALLY IMPROVE THE SURFACE QUALITY OF 3D PRINTED PARTS.

You can purchase the Polysher from our store here.

PolySmooth gives excellent printing characteristics, balanced mechanical properties and most importantly, polishability, when exposed to common alcohols such as isopropyl alcohol or ethanol.

The Polysher was designed with a methodical approach from the electronics to the bolts used,with over 40 parts, our designers made sure nothing was overlooked, ensuring accurate designs and well thought out manufacturing.

Features

Polishable: The first 3D printable filament engineered for layer free post-processing. We have specifically developed PolySmooth to work alongside the Polysher providing the solution to dramatically improve the surface quality of 3D printed objects.

Intuitive & Easy To Use: Simply twist the dial to set the time, sit back and watch the magic happen.
 

Easy to Print: PolySmooth is compatible with all filament-based 3D printers and prints under similar conditions as PLA. Featuring a wide printing temperature range, low odour and no heated bed required, PolySmooth is the perfect companion to your desktop 3D printer.
 

Built-In Safety Features: The Polysher was designed with smart electronics,air tight seals and more.
 

Optimized for Support: We have taken our experience from PolySupport and engineered PolySmooth with the same support removal properties. Easily break away support from PolySmooths surface and once your model is polished there is no scar left on the surface.
 

Low Costs: The Polysher is not only affordable but its running cost is incredibly low too.
 

Balanced Mechanical Properties: PolySmooth features well balanced mechanical properties, outperforming ABS and PLA on most attributes, making it an ideal material for everyday 3D printing.
 

Warping Free: PolySmooth exhibits very minimal residual stress when printing which means almost no warping, making it ideal for printing large parts.

Material Specs

Recommended Glass Transition Temp

~ 70 °c

Density

1.05 1.10 g/cm3

Diameters

1.75 mm or 2.85 mm

Tolerance

± 0.05 mm (Typical ~ ± 0.02 mm )

Recommended Printing Temp*

210 230 °c

Recommended Printing Speed*

40 90 mm/s

Recommended HBP¹ (if equipped) Temp

Up to 70 °c

Note 1.HBP=Heated Build Plate  *.Printing temperature and speed may vary

Whats in the box 

Polysmooth Specs & Operation

Technology

Nebulized Aerosol Polishing

Compatible Material

PolySmooth

Polishing Liquid

Isopropanol or ethanol, 70% or above [90% or higher recommended] not supplied – though it can be purchased here.

Polishing Time

10 30 min typical (depending on part size)

Product Dimensions

230 x 270 x 370 mm

Maximum Polishable Part Size

150 mm (diameter) x 180 mm (height) cylinder [5.9 in (diameter) x 7.1 in (height)]

Operating Temperature

15 32 °c

Storage Temperature

0 38 °c

Power Requirements

100 240 V, 2A max, 50/60 Hz

Whats in the box

 PolySmooth in Action