PolyTerra PLA+ Grey 1.75mm 1Kg

PolyTerra PLA+ Grey 1.75mm 1Kg

£23.70 £19.75 ex. VAT

In stock

£23.70 £19.75 ex. VAT

PolyTerra™️ PLA+ is an enhanced bioplastic based 3d printing filament designed from the ground up to create the next generation of PLA+.

Availability: In stock SKU: 54308

Description

Compare all Polymaker materials and colours here

 

PolyTerra™️ PLA+ is an enhanced bioplastic based 3d printing filament designed from the ground up to create the next generation of PLA+, providing ease of use, printing quality, speed and reliability. It is a sustainable product sourced naturally and for every spool sold a tree is planted to give back to the earth.

 
 

  For every spool you purchase, Polymaker working with https://onetreeplanted.org/ will plant a tree for you on our beautiful planet.  Both the spool and packaging box is made from 100% recycled cardboard.  Data sheets are also made available online at the bottom of this page to reduce paper printing.   PolyTerra™ PLA and PolyTerra™ PLA+ are based on the same eco-friendly formula however PLA+ was optimized for better layer adhesion and overall strength.  

 

No, PolyTerra™ PLA+ has a more silky finish.  
 
 

       

 

Printing Temperature: 190˚C – 230˚C Bed Temperature: 25˚C – 60˚C Printing Speed: 30mm/s – 70mm/s Fan: ON Direct Drive: Retraction Distance: 1mm Retraction Speed: 20mm/s Indirect Drive: Retraction Distance: 3mm Retraction Speed: 40mm/s Drying Settings: 55˚C for 6h (Only if the material has absorbed moisture)

PLA

Overview

PLA is easy to print, at low cost. Non-toxic and Eco friendly. A perfect starting point for people new to 3D printing.

PLA is created from all-natural renewable resources, and under the correct conditions, is fully biodegradable. This material is typically used for prototypes or decorative prints; Due to the low temperatures and ease of use, features tend to print sharper and more detailed. Its non-toxic nature means that it can be printed for food and medical applications if done so from a sterile and sanitized environment. 
However, PLA prints are prone to snapping and breaking under pressure, and become damaged and discolored from high temperatures and prolonged exposure to sunlight or water. 

Used for: Design prototypes, Plastic Cups, Medical Implants, Food containers.

Strength

Medium

Durability

Low

Printability

Very Easy

Pros

Cons

Recommended Settings

Print Temp

180°C -210°C

Cooling Fan on

Temp may vary on brand

Bed Temp

0°C – 45°C

Temp may vary on brand

Print Surface

No Heated Bed Required
No Enclosure Required

Example Prints

Additional information

Weight1 kg
Dimensions210 × 210 × 75 mm
Cardboard Spool

Yes

Filament Brand

Polymaker™

Filament Colour

Grey

Filament Diameter

1.75mm

Filament Type

PLA

Filament Weight

1Kg

Filament Range

PolyTerra PLA+

Reviews

There are no reviews yet.


Be the first to review “PolyTerra PLA+ Grey 1.75mm 1Kg”