PolyTerra PLA+ Orange 1.75mm 1Kg
£23.70 £19.75 ex. VAT
PolyTerra™️ PLA+ is an enhanced bioplastic based 3d printing filament designed from the ground up to create the next generation of PLA+.
- Description
- What is PLA?
- Additional information
- Reviews (0)
Description
PolyTerra™️ PLA+ is an enhanced bioplastic based 3d printing filament designed from the ground up to create the next generation of PLA+, providing ease of use, printing quality, speed and reliability. It is a sustainable product sourced naturally and for every spool sold a tree is planted to give back to the earth.
For every spool you purchase, Polymaker working with https://onetreeplanted.org/ will plant a tree for you on our beautiful planet. Both the spool and packaging box is made from 100% recycled cardboard. Data sheets are also made available online at the bottom of this page to reduce paper printing. PolyTerra™ PLA and PolyTerra™ PLA+ are based on the same eco-friendly formula however PLA+ was optimized for better layer adhesion and overall strength.
PLA
Overview
PLA is easy to print, at low cost. Non-toxic and Eco friendly. A perfect starting point for people new to 3D printing.
PLA is created from all-natural renewable resources, and under the correct conditions, is fully biodegradable. This material is typically used for prototypes or decorative prints; Due to the low temperatures and ease of use, features tend to print sharper and more detailed. Its non-toxic nature means that it can be printed for food and medical applications if done so from a sterile and sanitized environment.
However, PLA prints are prone to snapping and breaking under pressure, and become damaged and discolored from high temperatures and prolonged exposure to sunlight or water.
Used for: Design prototypes, Plastic Cups, Medical Implants, Food containers.
Printability
Very Easy
Pros
- Low Cost
- Easy to Print
- Eco Friendly
- Does Not Warp
Cons
- Less robust than other materials
- Vulnerable to Water and sunlight
Recommended Settings
Print Temp
180°C -210°C
Cooling Fan on
Temp may vary on brand
Bed Temp
Temp may vary on brand
Print Surface
No Heated Bed Required
No Enclosure Required
Example Prints
Additional information
| Weight | 1 kg |
|---|---|
| Dimensions | 210 × 210 × 75 mm |
| Cardboard Spool | Yes |
| Filament Brand | Polymaker™ |
| Filament Colour | Orange |
| Filament Diameter | 1.75mm |
| Filament Type | PLA |
| Filament Weight | 1Kg |
| Filament Range | PolyTerra PLA+ |
Be the first to review “PolyTerra PLA+ Orange 1.75mm 1Kg”
You must be logged in to post a review.
Reviews
There are no reviews yet.